Long Rulers

An all-purpose basic ruler for beginners to advanced. If you're wondering which ruler to get first - this is it! Includes 30, 45 and 60 degree angle markings plus 1/8" markings throughout.

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

The most popular Omnigrid rule - the basic rule for any patchworker. Allows the user to cut double-folded fabrics off the bolt accurately using the contrasting yellow and black lines - perfect for almost every fabric colour.

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

Use the 6 inch x 24 inch (RA624) OmniAngle ruler for your angle cuts. The following example creates an 18 degree wedge but a 9-10-22-1/2 degree - 36 degree or 45 degree wedge can be created using exactly the same method.

Instructions:
Using any width fabric strip or strata - line up the desired angle of the OmniAngle ruler with the bottom or top edge of the strip or seam, whichever side you choose be sure to stay consistent. Now make your first cut along the long edge of the OmniAngle ruler. Rotate the ruler to the other desired angle and line it up with the bottom edge of the strip - at the same time making sure that the OmniAngle ruler also intersects with the top point of the previous cut. Make your cut and you will have your first wedge. Repeat these steps for additional wedges

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

Whether you are a die-hard "imperialist" or a modern metric enthusiast the fact is that books and patterns from America measure in inches and Europe uses centimetres. This ruler from Marti Michell combine both measurements by splitting the ruler into two parts which are easy to distinguish from each other. Very useful if you need to switch between the two types.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

The TrueCut patchwork rulers have a special track that interlocks with the cutter guide on the My Comfort range of rotary cutters. This allows for superior precision and accuracy! As you cut, the track and guide
keep the cutter from slipping away from the ruler’s edge.

• Works with the Cutter Guides to give you straight cuts every time
• Measured in 1/8 inch increments
• Labeled 1/4 and 3/4 inch marks for easy measurements
• Built-in spaces for marking your fabric directly through the ruler
• 30, 40, and 60 degree angle lines

Please note True Cut Rulers are not compatible with Omnigrid Ruler Grips (10302, 10303)

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

Related products:

1. TrueCut My Comfort Rotary Cutter 45mm (Ref: 10532)

The lip edge acts as a T-square against the edge of your board to ensure an accurate cut and less chance of slipping.

An excellent ruler to add to your collection - a 1/2" seam allowance is included along one side, making it easy to cut a border of any width up to 8".

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

Metric Omnigrid Ruler

Non UK customers please note that this item is heavy/delicate or requires lots of packing and we can not supply it to overseas customers.

Whether you are a die-hard "imperialist" or a modern metric enthusiast the fact is that books and patterns from America measure in inches and Europe uses centimetres. This ruler from Marti Michell combine both measurements by splitting the ruler into two parts which are easy to distinguish from each other. Very useful if you need to switch between the two types.

OmniEdge rulers feature a 1/8" detachable lip that aligns against your cutting mat edge to prevent the ruler slipping. Highlighted outer edges reduce cutting errors which trimming 1/4" seam allowances. Numbers and marks are highlighted for easy reading and accurate cuts. Ideal for straight and bias pieces. Includes 40 degree and 60 degree angle lines.

OmniEdge rulers feature a 1/8" detachable lip that aligns against your cutting mat edge to prevent the ruler slipping. Highlighted outer edges reduce cutting errors which trimming 1/4" seam allowances. Numbers and marks are highlighted for easy reading and accurate cuts. Ideal for straight and bias pieces. Includes 40 degree and 60 degree angle lines.

Heavy duty acrylic with a thickness that allows rotary cutters to cut multiple layers of fabric at a time. Has 30, 45 and 60 degree markings, 1/4" and 1/8" marks. Easier to manipulate than the long rule so perfect for cutting narrower strips.

This ruler is excellent for general cutting, but it was actually designed by Nancy Johnson-Srebro while working on her new book, Stars by Magic. Following Nancy's technique , this ruler is used to make 8-pointed stars, Lone Stars and more using only squares and rectangles. The easy rotary cutting methods guarantee perfect star points - no dog ears, no Y-seams to contend with, no bias edges and no diamonds to cut!

A narrow manipulator, this ruler makes quick work of cutting sashing strips and strips from fat quarters. A convenient, multi-purpose ruler that can be stowed away for travel or classes.

The TrueCut patchwork rulers have a special track that interlocks with the cutter guide on the My Comfort range of rotary cutters. This allows for superior precision and accuracy! As you cut, the track and guide
keep the cutter from slipping away from the ruler’s edge.

• Works with the Cutter Guides to give you straight cuts every time
• Measured in 1/8 inch increments
• Labeled 1/4 and 3/4 inch marks for easy measurements
• Built-in spaces for marking your fabric directly through the ruler
• 30, 40, and 60 degree angle lines

Please note True Cut Rulers are not compatible with Omnigrid Ruler Grips (10302, 10303)


Related products:

1. TrueCut My Comfort Rotary Cutter 45mm (Ref: 10532)

A shorter version of the 6" x 24" with the same markings. Popular secondary cutting of strips into squares and shapes. Handy for fat quarters.

A handy rule to check seam allowances.

Metric Omnigrid Ruler

Metric Omnigrid Ruler

A handy travel ruler with an 1/8" grid for miniature work.

Perfect for the workbox - check seam allowances, use it to make templates and trim off loose threads.

Use these rulers to quickly and accurately perform a variety of marking tasks. The center line is exactly 1/4" from both edges of the ruler. This provides an accurate reference line for: marking 1/4" sewing lines , adding 1/4" seam allowances, checking 1/4" seam allowances, marking 1/4" quilting lines. The three ruler lengths accomodate a variety of different size marking tasks. Use a pencil with a fine, sharp point for the most accurate mark.

CAUTION: Do not use rulers with rotary cutters, knives or other cutting instruments. Rulers are designed for marking use only. Injury may result if rulers are used for cutting and trimming tasks.

Double Suction Cups for patchwork rulers. Provides a steady grip on your ruler and keeps fingers away from rotary blade when cutting. *Works on clean, smooth surface rulers or templates * Attaches in seconds *Easy to use!

Instructions:
1. Flip up both black levers to release suction cups. 2. Place Ruler Grip against surface. 3. Gently press down on Grip while flipping down both levers. 4. Position ruler or template for cutting and press down on Grip to keep ruler in place. To remove Ruler Grip, flip up both levers and slide finger under suction cups to break the seal.

Please note: Not suitable for use with the TrueCut range of patchwork rulers.

Single Suction Cup for patchwork rulers. Works on clean, smooth surface rulers or templates. *Attaches in seconds. Easy to use! Provides a steady grip on your ruler and keeps fingers away from rotary blade when cutting.

Instructions:
1. Flip down one side of handle to release suction. 2. Place Ruler Grip against surface. 3. Flip up handle to apply suction. 4. Position ruler or template for cutting and press down on Grip to keep ruler in place. To remove Ruler Grip, Flip down handle and slide finger under suction cup to break the seal.

Please note: Not suitable for use with the TrueCut range of patchwork rulers.

Glow-Line, a transparent, fluorescent tape for highlighting lines and shapes on rulers.

Apply Glow-Line to the underside of a ruler to highlight measurements or shapes. Saves time and avoids errors when cutting multiples of the same shape.

Glow-Line is low tack - it will not leave residue on your ruler. Three rolls per pack - pink orange and yellow. Each roll has 7 yards of ¼" wide tape.

For straight, accurate cuts, you need to keep your ruler from slipping. TrueGrips help you by adding a completely nonskid surface to any ruler. 15 grips per pack.

The TrueGrips can be simply attached to any ruler helping to prevent your ruler slippling, increasing safety and accuracy. Transparent for easy fabric visibility.

Invisigrip is a clear non-slip material that is applied to the underside of rulers and templates. It is easy to apply and does not obscure the markings. When you want to apply pressure it prevents rulers from slipping but slides easily when no pressure is applied.

Prevents templates and rulers slipping. 36 per pack.