Buy Bondaweb by the Roll and save £7.50!.

Double-sided adhesive to bond fabrics together simply by ironing. 16" (44cm) wide x 30m. Bondaweb is available by the metre. Minimum order quantity is a metre.

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Double-sided adhesive to bond fabrics together simply by ironing. 44cm (17") wide. Bondaweb is available by the metre. Minimum order quantity is a metre. By Vilene

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Stable iron-on Interfacing for shaped bands, shaped belts and handicrafts. Prevents stretching and ensures retained shape.

Fabric: Light to middle weight fabrics such as e.g. cotton, Trivia®

Advantages:

Simple to apply
Long lasting shape
Also washable at higher temperatures

Method of use:
Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.

Iron setting: Wool.

Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of Interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care:
Washable in temperatures up to 60 °C or dry cleanable

Width 90 cm, available by the metre, minimum order quantity is a metre.

100% cotton Lightweight woven cotton with fusible on one side. Can be used to stabilize many fabrics such as silk, velvets, taffeta, cotton lawn, etc to make them easier to work with.

Adds body and stability to cotton fabrics and can be used as a backing for needlework and embroidery.

92cm wide

Use a steam iron. Glide iron slowly over area to be fused around 6 times applying steam and pressure.

Equivalent to Pellon ShapeFlex Woven Fusible #SF-101

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Also known as Pelmet Vilene this is a firm interfacing which is ideally suited for pelmets and creative projects such as fabric postcards, collages, tiwbacks, fabric painting bags etc.

Care: Washable in temperatures up to 30 °C on a gentle cycle or dry cleanable

60% Polyester, 40% ZS

90cm wide.

Available by the metre, minimum order quantity is a metre.

Very firm and compact interlining. For fabric bowls, cap peaks, bag bottoms, creative art and brooches.
Will work with almost all fabrics. Does not crease easily – retains strength. Fusible on one side.

Set iron to wool/cotton, press on firmly step by step using a damp pressing cloth until fused (about 15 secs depending on the fabric). Alternatively use a Teflon pressing sheet from the fabric side.

Handwash and dry flat.

Equivalent to Pellon Peltex #72 – double-sided fusible

Has a smooth, fabric look. Retains shape and is easy to iron-on.
Vilene Firm Fusible is a firm pelmet interfacing for all widths and forms of pelmet. Also very suitable for bands, belts, bags, and creative handicrafts. It has the benefit of being flexible but firm.

First iron the fabrics thoroughly with steam to avoid any shrinkage later. Allow the fabrics to dry completely. Place the interfacing with the coated side on the wrong side of the fabric. Then cover with a damp cloth and glide the iron over each area and press for about 15 seconds, without letting the iron move. Repeat until all fused. Remove pressing cloth and iron fabric to eliminate excess moisture.

Allow item to cool before using. Iron setting: wool/cotton.

90cm wide

Wash flat in temperatures up to 40 °C in the gentle cycle or roll in a laundry bag. Dry cleanable.

Equivalent to Pellon Peltex #71 – single-sided fusible

Has a smooth, fabric look. Retains shape and is easy to iron-on.
Vilene Firm Fusible is a firm pelmet interfacing for all widths and forms of pelmet. Also very suitable for bands, belts, bags, and creative handicrafts. It has the benefit of being flexible but firm.

First iron the fabrics thoroughly with steam to avoid any shrinkage later. Allow the fabrics to dry completely. Place the interfacing with the coated side on the wrong side of the fabric. Then cover with a damp cloth and glide the iron over each area and press for about 15 seconds, without letting the iron move. Repeat until all fused. Remove pressing cloth and iron fabric to eliminate excess moisture.

Allow item to cool before using. Iron setting: wool/cotton.

45cm wide

Wash flat in temperatures up to 40 °C in the gentle cycle or roll in a laundry bag. Dry cleanable.

Equivalent to Pellon Peltex #71 – single-sided fusible

Equivalent to Pellon 30-lightweight sew-in.

Particularly soft and easy facing. Good for small pieces such as collars, cuffs, etc. on blouses and dresses.

Suitable for seersucker, velvet, metallic and pile fabrics.

Advantages: Easy to sew. Comfortable to wear. Strong yet flexible feel

Method of use: Sew by hand or machine.

Care: Washable in temperatures up to 95 °C or dry cleanable

100% Polyester

90cm wide.

Available by the metre, minimum order quantity is a metre.

Equivalent to Pellon 40-midweight sew-in.

Soft medium-weight facing, universally usable for front parts of dresses, waistcoats, jackets and coats as well as collars, pockets, flaps, etc. Also ideal for use in lightweight jackets as a graft.

Fabric: Light to middle weight fabrics, e.g. corduroy, velvet, metallics fabics

Advantages: Easy to sew comfortable to wear strong yet flexible feel

Method of use: Sew by hand or machine.

Care: Washable in temperatures up to 95 °C or dry cleanable

100% Polyester

90cm wide.

Available by the metre, minimum order quantity is a metre.

Equivalent to Pellon 50-heavyweight sew-in.

Heavier handle sew in interfacing, universally usable for crafts and jackets and coats as well as collars, pockets, flaps etc.

Suitable for wools, tweeds, gabardine and craft fabrics.

Method of use: Sew by hand or machine.

Care: Washable in temperatures up to 95 °C or dry cleanable

100% Polyester

90cm wide.

Available by the metre, minimum order quantity is a metre.

Equivalent to Pellon #911FF Featherweight

Soft Interfacing universally usable for the front sections of waistcoats, jackets and coats as well as for collars, pockets, flaps etc.

Fabric: Light to middle weight fabrics such as wool or raw silk

Advantages: Shape retaining. Flawless fit. Strong yet adjustable hold

Method of use: Place the Interfacing with the coated side on the wrong side of the fabric. Cover the entire area with a damp ironing cloth. Press each area for about 10 to 12 seconds, being careful not to move the iron. Iron setting: Wool/cotton. Allow the pieces to cool flat for about 30 minutes, so that the can set properly.

It is strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 40 °C or dry cleanable

100% Polyester

90cm wide.

Available by the metre, minimum order quantity is a metre.

Particularly soft and lightweight interfacing. Ideal for small parts such as collars, cuffs, etc. as well as for the front parts of jackets and stylish blazers made in very light to middle weight fabrics.

Fabric: Delicate flowing fabrics such as silk, viscose, acetate and cuprous etc. Also suitable for Cool Wool.

Advantages: Excellent hold on difficult stylish fabrics such as e.g. viscose, acetate and cuprous
Simple to iron-on. Comfortable to wear. Strong yet flexible feel

Method of use: Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.
Iron setting: silk/wool. Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly. We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 40 °C or dry cleanable

90cm wide.

Available by the metre, minimum order quantity is a metre.

Particularly soft and lightweight interfacing. Ideal for small parts such as collars, cuffs, etc. as well as for the front parts of jackets and stylish blazers made in very light to middle weight fabrics.

Fabric: Delicate flowing fabrics such as silk, viscose, acetate and cuprous etc. Also suitable for Cool Wool.

Advantages: Excellent hold on difficult stylish fabrics such as e.g. viscose, acetate and cuprous
Simple to iron-on. Comfortable to wear. Strong yet flexible feel

Method of use: Place the interfacing with the coated side on the wrong side of the fabric. Then using dry heat glide the iron firmly 5-6 times very slowly over each area of the insert, so that each area receives approx. 8 seconds of heat.
Iron setting: silk/wool. Allow the pieces to cool flat for about 20 minutes, so that the adhesive can set properly. We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable in temperatures up to 40 °C or dry cleanable

100% Polyester

90cm wide.

Available by the metre, minimum order quantity is a metre.

90cm wide interfacing with pre-printed isometric triangles.

Available by the metre. Minimum order quantity is a metre.

90cm wide interfacing with pre-printed geometric 1cm x 1cm squares (5cm x 5cm highlighted squares).

Available by the metre. Minimum order quantity is a metre.

Tear away stabiliser. 90cm wide.

Available by the metre. Minimum order quantity is a metre.

Iron-on volume fleece quilts, clothing, bags, soft pelmets and tiebacks.
Low loft – for a higher loft use Medium Loft.

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gentle cycle or dry cleanable

Equivalent to Pellon #987F Fusible Fleece

23mm x 5m tape. Bonds fabrics together for a no-sew hem.

Iron-on volume fleece for quilts, clothing, bags, soft pelmets and tiebacks.
Medium loft – for a lower loft use Low Loft.

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gently cycle or dry cleanable

Equivalent to Pellon Fusible Thermolam Plus #TP971F