1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Clover Misc Tools and Notions

Page:  1  2   >   >>   View All (35)

Clover of Japan Tools

A wide selection of sewing tools, notions and gadgets from Clover of Japan

Clover Quilt Dome Needle Case

Clover Quilt Dome Needle Case

Ref: 7121

In stock

Novel way of storing up to 10 pre-threaded needles. Put your pre-threaded needles in a slot (each has a number which is useful for cross-stich or embroidery) and wind the blue section. The thread is wound around inside and can be easily removed.

Produced by: Clover

Part Number: 625

 

7.20



Clover Supersize 5-in-1 Sliding Gauge
Clover Supersize 5-in-1 Sliding Gauge - view 1Clover Supersize 5-in-1 Sliding Gauge - view 2Clover Supersize 5-in-1 Sliding Gauge - view 3

Clover Supersize 5-in-1 Sliding Gauge

Ref: 12508

In stock

A multifunctional 11 inch sliding gauge for easy marking. The extra length makes it easy to accurately position grainlines, measure deep hems, position trims, create large circles and measure distances,

Produced by: Clover

Part Number: 9585

 

14.95



Clover Double-ended Needle Threader

Clover Double-ended Needle Threader

Ref: 596

In stock

A double-ended threader, suitable for threading large and small needles, including quilting needles.

Produced by: Clover

Part Number: 462/NV

 

3.25



Clover Easy Loop Turner

Clover Easy Loop Turner

Ref: 7189

In stock

For turning tubes or binding strips the right way out. Cord or wadding can then be inserted using the Easy Turn.

Produced by: Clover

Part Number: 472

 

4.10



Needle Threader - Ornate Quilt Threader (Clover)

Needle Threader - Ornate Quilt Threader (Clover)

Ref: 7112

In stock

Decorative needle threader that is ideal for threading fine needles. The background behind the wire together with the large hole make threading easier. An ideal gift.

Produced by: Clover

Part Number: 466

 

5.40



Clover Loop Pressing Bars

Clover Loop Pressing Bars

Ref: 8762

In stock

Create 3D appliqué and Celtic designs.

Seam allowance of loop can be pressed to one side

Straighten seams correctly.

Cord can be pulled through the loop using the clip at the end of the bar.

Pack contains five bars in 6, 9, 12, 15 and 18mm widths.

Produced by: Clover

Part Number: 4052

 

5.50



Clover Fusible Web 5mm x 25m

Clover Fusible Web 5mm x 25m

Ref: 8538

In stock

The fusible web in 5mm is used with the 1/4" (Ref 8528) and 3/8" (Ref 8529) tape makers. 5mm x 25 metres.

Produced by: Clover

Part Number: 4041

 

7.20



Clover Fusible Web 10mm x 12m

Clover Fusible Web 10mm x 12m

Ref: 8539

In stock

The fusible web in 10mm is used with the 3/4" tape maker (Ref 8530). 10mm x 25 metres.

Produced by: Clover

Part Number: 4042

 

7.20



Clover Point 2 Point Turner
Clover Point 2 Point Turner - view 1Clover Point 2 Point Turner - view 2Clover Point 2 Point Turner - view 3

Clover Point 2 Point Turner

Ref: 13734

In stock

Turn every point perfectly. Features two turner tips, hera marker, finger presser and two curved edges to push out along curved or long seams. Ideal for point turning, detail work, pressing seams or marking fabric.

Features

Curved end with the tip for point turning
Fine tipped end for detail work
Designed to be comfortable and secure in hand when using either end

How to Use
Push corners out using either tip
Push along seam to press outward using curved end
Press a fold or seam using flat side curved end
Use edges to mark fabric

Produced by: Clover

Part Number: 7803

 

7.75



Clover Sewing Gauge
Clover Sewing Gauge - view 1Clover Sewing Gauge - view 2Clover Sewing Gauge - view 3

Clover Sewing Gauge

Ref: 13735

In stock

For marking seam allowances and button holes. Can be marked from 1 to 5cm in units of 5mm.

Produced by: Clover

Part Number: 7705

 

7.70



Clover Mesh Transfer Canvas

Clover Mesh Transfer Canvas

Ref: 7184

In stock

Used for transferring designs to patchwork quilting, sewing, applique, stenciling and crafting design layouts. Just by re-tracing the outline you have traced onto can be easily transferred. Use Mesh Transfer Canvas over and over again, wipes off.

Place the mesh on a design layout
Use a pen to trace the layout on the mesh
Place over your fabric
Trace the outline on the mesh again and the layout will appear in the form of dotted lines.

Produced by: Clover

Part Number: 474

 

7.30



Clover Ball-Pointed Awl

Clover Ball-Pointed Awl

Ref: 8194

In stock

Useful for punching small holes for stuffing - pushes fabric aside rather than splitting it.

Produced by: Clover

Part Number: 876

 

7.80



Clover Fabric Adhesive Stick

Clover Fabric Adhesive Stick

Ref: 8541

In stock

For temporary hold on fabric, paper, felt and other piecing projects.

Apply the Fabric Adhesive Stick to your fabric. You can sew your fabrics together without gumming up you needles.

Produced by: Clover

Part Number: 514

 

5.70



Clover Soft Touch Thread Pic

Clover Soft Touch Thread Pic

Ref: 10155

In stock

Slips easily between fabric layers

Leaves no marks or punctures

Hide broken threads

Remove stray threads

Produced by: Clover

Part Number: 4910

 

6.30



Seam Ripper (Clover)

Seam Ripper (Clover)

Ref: 7117

In stock

This seam ripper unpicker has an easy-to-grip handle

Produced by: Clover

Part Number: 482/W

 

3.25



Clover Kantan Couture Bead Tool
Clover Kantan Couture Bead Tool - view 1Clover Kantan Couture Bead Tool - view 2

Clover Kantan Couture Bead Tool

Ref: 13716

In stock

With the Kantan Couture Tool beads and spangles are easily applied. Chain-stitching is a breeze. Winner of the CHA's "Best of Innovation 2006" Award, this old art of Embroidery using a fine hook on a fine cloth tightly stretched in a frame called Tambour, is reborn with Clover's Kantan Couture Bead Embroidery Tool. Basic techniques with this tool can create beautiful motifs using sequins and beads. Embellish, create and make it your own. Your imagination possibilities are endless...

Produced by: Clover

Part Number: 9900

 

12.65



Clover Cut Work Scissors (4 1/2

Clover Cut Work Scissors (4 1/2")

Ref: 7188

In stock

Fine pointed scissors for accurate work. Includes a leather case.

Produced by: Clover

Part Number: 493/CW

 

17.70



Clover Patchwork Scissors (175mm/7

Clover Patchwork Scissors (175mm/7")

Ref: 890

In stock

The serrated blade holds the layers of fabric whilst being used for a more accurate cut.

Produced by: Clover

Part Number: 493

 

19.95



Clover Patchwork Scissors, Large

Clover Patchwork Scissors, Large

Ref: 9239

In stock

Clover Patchwork Scissors, Large

Made of top grade stainless steel. Serrated blade suitable for cutting multiple layers of fabrics or pieces for patchwork. 24cm long.

Produced by: Clover

Part Number: 493/L

 

40.40



Clover Patchwork Templates - Triangle/Hexagon

Clover Patchwork Templates - Triangle/Hexagon

Ref: 7120

In stock

Seven templates - hexagon (2), diamonds (2) and triangles (3) made of 1/4" plastic for "English Patchwork". Inside and outside of the 1/4" plastic gives you the cutting line for your template and fabric.

The inside measurement of the large hexagon is approx 3.5" (inside edge flat side to flat side)

Produced by: Clover

Part Number: 494/T

 

5.60



Clover Patchwork Templates - Square/Octagon

Clover Patchwork Templates - Square/Octagon

Ref: 7119

In stock

Seven templates - squares (2), octagon, diamonds (2) and triangles (2) made of 1/4" plastic for "English Patchwork". Inside and outside of the 1/4" plastic gives you the cutting line for your template and fabric.

The inside measurement of the large square is 3.25"

Produced by: Clover

Part Number: 494/S

 

5.60



Clover Threader with Cutter
Clover Threader with Cutter - view 1Clover Threader with Cutter - view 2

Clover Threader with Cutter

Ref: 13709

In stock

Two easy needle threaders from Clover combined with a convenient thread cutter. 2pcs per package. "Petit Cut"

Produced by: Clover

Part Number: 478

 

2.95



Clover Desk Needle Threader (Green)
Clover Desk Needle Threader (Green) - view 1Clover Desk Needle Threader (Green) - view 2

Clover Desk Needle Threader (Green)

Ref: 13776

In stock

A Needle Threader that's simple to use! Desk needle colour Green

1) Set in a length of thread
2) Set in a needle
3) Press the lever
4) Pull out the needle
5) Cut the thread

Applicable Needles: Needles with (thickness: 0.51-0.89mm), works best with oval eye needles.

Produced by: Clover

Part Number: 4072

 

10.95



Clover Desk Needle Threader (Pink)
Clover Desk Needle Threader (Pink) - view 1Clover Desk Needle Threader (Pink) - view 2

Clover Desk Needle Threader (Pink)

Ref: 13777

In stock

A Needle Threader that's simple to use! Desk needle colour Pink

1) Set in a length of thread
2) Set in a needle
3) Press the lever
4) Pull out the needle
5) Cut the thread

Applicable Needles: Needles with (thickness: 0.51-0.89mm), works best with oval eye needles.

Produced by: Clover

Part Number: 4073

 

10.95



Clover Large Tassel Maker
Clover Large Tassel Maker - view 1Clover Large Tassel Maker - view 2Clover Large Tassel Maker - view 3

Clover Large Tassel Maker

Ref: 13685

In stock

Create tassels with your favorite threads! Easily make tassels with embroidery thread, woolen yarns and others.

The large Clover Tassel Maker can embellish anything from home decor to bags, clothing and other accessories.

This Tassel Maker makes 5 sizes: 2 3/8in (6 cm), 2 3/4in (7 cm), 3 1/8 in (8 cm), 3 1/2in (9 cm), 4 in (10 cm).

Produced by: Clover

Part Number: 9941

 

10.15



Clover Small Tassel Maker
Clover Small Tassel Maker - view 1Clover Small Tassel Maker - view 2Clover Small Tassel Maker - view 3

Clover Small Tassel Maker

Ref: 13684

In stock

Create tassels with your favorite threads! Easily make tassels with embroidery thread, woolen yarns and others.

The small Clover Tassel Maker can embellish anything from home decor to clothing and other accessories.

The small Tassel Maker makes 3 sizes: 1 3/16 in., 1 9/16 in., and 2 in.

Produced by: Clover

Part Number: 9940

 

9.30



Clover Large Rosette Maker
Clover Large Rosette Maker - view 1Clover Large Rosette Maker - view 2Clover Large Rosette Maker - view 3

Clover Large Rosette Maker

Ref: 13715

In stock

It's so easy to create beautiful rosettes. You can use the plate with a 1 or a 1.5in (24 or 36mm) wide ribbon to create rosettes of 2 different sizes of approximately 8 or 9cm diameter. Rosette parts included.

Suitable Materials

Suitable Ribbon: Thin fabrics (like satin ribbon)
Unsuitable Ribbon: Very thin fabrics (like organdy ribbon) or thick fabrics

How to make
Use the plate to create folds with the ribbon
Attach the stickers to keep the shape of the Rosette
Glue the center part and the brooch base to the Rosette

Produced by: Clover

Part Number: 8431

 

13.25



Clover Hana-Ami Flower Loom
Clover Hana-Ami Flower Loom - view 1Clover Hana-Ami Flower Loom - view 2Clover Hana-Ami Flower Loom - view 3Clover Hana-Ami Flower Loom - view 4

Clover Hana-Ami Flower Loom

Ref: 13705

In stock

Easy to use loom shapes make flowers ready for use in round, square and hexagonal designs and in different sizes. Simple and fun! Create flowers with your favorite material: yarn, ribbon, fabric strips, raffia, twine, jute and threads. Detailed instructions included. Tapestry needle included.

How to use

Select a loom and set on the base
Wind the yarn around the pegs in a criss-cross fashion
Weave the yarn around each petal to make a center
And you have a flower
*Further instructions included in the package

Contents (Finished Size)

Hexagon loom (2.83"/72mm)
Square loom-Small (1.57"/40mm)
Square loom-Large (3.28"/82mm)
Round loom-Small (1.69"/43mm)
Round loom-Medium (2.24"/57mm)
Round loom-Large(3.27"/83mm)

Produced by: Clover

Part Number: 3146

 

12.60



Clover Puff Quilting Small Clips Set
Clover Puff Quilting Small Clips Set - view 1Clover Puff Quilting Small Clips Set - view 2

Clover Puff Quilting Small Clips Set

Ref: 11073

In stock

Create 5 different dimensional designs for your projects with Puff Quilting tools. Get 12 more clips and one more pair of templates (base & top) for all your quilting needs!

Create pleats in your fabric with the clips, sew and flip over. Stuff inside and a fluffy puff is done. Full instructions included.

Small Finished size: approx. 1 9/16"

Produced by: Clover

Part Number: 8402

 

6.20



2, 3/4

2, 3/4" Nickel D-Rings

Ref: 8927

In stock

Sew onto fabric strip - works in conjunction with the Swivel Ring.

2 D-Rings per pack.

Produced by: Clover

Part Number: 6181

 

1.65



Page:  1  2   >   >>   View All (35)

Recently Viewed