1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Marti Michell Rulers and Templates

Show First 30 Product(s)

Squaring Up Ruler: Marti Michell 6 1/2

Squaring Up Ruler: Marti Michell 6 1/2"

Ref: 13953

In stock

Marti Michell 6 1/2" squaring up ruler. Gridded using the same symbols as our large rulers, but also with a shadow that follows every inch mark, turns a corner and connections, making it easy to see squares. There is one 45-degree diagonal line to help square up half-square triangle units. The last 1/4-inch is great for checking seam allowance.

Squaring up is very different from just plain measuring. On this ruler, the numbering goes from one corner along two sides. It does not go both left and right.

The entire ruler is gridded using the same symbols as our two larger rulers, but in addition, there is a shadow that follows every inch mark, turns a corner and connects to make seeing squares very easy.

Right-handers generally put the focal corner in the upper right while left-handed cutters will position and measure from the upper left.

When those two exposed edges are trimmed, the fabric piece is rotated so that the trimmed sides line up with the correct measurement and the untrimmed sides are ready to be perfected.

There is one 45 degree diagonal line. Many people like to use that when they square up half-square triangle pairs.

The last 1/4" on two sides is used to check the accuracy of seam allowances.

Produced by: Marti Michell

Part Number: 8973

 

11.35

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Tumbler One-derful One-Patch Templates

Tumbler One-derful One-Patch Templates

Ref: 10460

In stock

One template for cutting 7 sizes of Tumblers (or Thimbles) from strips or scraps. The smallest size is perfect for cutting on Jelly Roll strips.

Perfect for scrap quilts. Perfect thimble proportions. Quarter-inch seam allowances included on all sizes. Engineered corners with laser-cut accuracy. Includes instruction booklet for cutting and sewing all sizes.

Instructions include cutting left and right handed on the proper grainline, plus Tumbler construction tips and project planning guidelines.

Finished Heights 2", 2 1/2", 3", 3 1/2", 4", 4 1/2", 5" and 5 1/2"

Produced by: Marti Michell

Part Number: 8204

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Multi-Size Kite Ruler

Multi-Size Kite Ruler

Ref: 10167

In stock

One tool for cutting 2 shapes in 4 sizes!

Because it's measured in different ways in different block designs, we call the sizes Small, Medium, Large and Extra Large. Those sizes are perfect companions for Set E and the Kaleido-Rulers, and it fits the 45-degree diamond in the Stripper template set.

The instructions include step-by-steps for cutting all sizes from strips and as many ideas as we could come up with. It's great for blocks like stars and wheels and for cutting string-pieced shapes, too.

Produced by: Marti Michell

Part Number: 8158

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Sashing Stars Set

Sashing Stars Set

Ref: 10104

In stock

Add the sparkle of sashing stars to any quilt with sashings and cornerstones. Use this set to cut all the pieces to make 2", 3" and 4" wide finished size sashing stars. Make regular stars, elongated stars and, if you combine both point styles, twinkling stars. The sashing ruler is 4-1/2" wide by 12-1/2" long -- perfect for 12" blocks, yet easily positioned on the end of any length strip. Cut matching sashing squares (cornerstones) with the ruler, too! Comes with instructions.

Produced by: Marti Michell

Part Number: 8114

 

16.60

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Strippers: Strip Roll Templates

Strippers: Strip Roll Templates

Ref: 9537

In stock

The Strippers template set is for anyone who loves 2 1/2" strip rolls and wants basic geometric shapes to help make finished quilts. The 2-1/2-inch Stripper templates are the answer. Cut these shapes from the pre-cut strips with virtually no waste:
Hexagon
60-degree Diamond
45-degree Diamond
Equilateral Triangles
60-degree Conehead

Some of the blocks you can make with this set are: Gramdmother's Flower Garden, Six Pointed Star, I Psy, Tumbling Blocks, Inner City, LeMoyne Star.

Produced by: Marti Michell

Part Number: 8059

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Storm at Sea Diamond Template Set

Storm at Sea Diamond Template Set

Ref: 9716

In stock

The Storm at Sea Quilt is well-known as a quilt that has great movement and optical illusion. Although you only ever cut straight lines it looks as though there are curves. For anyone who finds curves challenging this is a bonus!

Produced by: Marti Michell

Part Number: 8065

 

14.85

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Multi-Size Peaky & Spike Triangle Rulers

Marti Michell Multi-Size Peaky & Spike Triangle Rulers

Ref: 12777

In stock

The Multi-size Peaky and Spike triangle tools (2 pieces to cut 2 shapes) makes it easy to cut any size Peaky and Spike triangle set from 1 to 6 inches every half-inch and trim the engineered corners, just like those available in From Marti Michell exact-size templates.

A multi-size tool allows auditioning different size triangles and is an economical way to enable cutting 11 different sizes with one tool. When the time comes that you need to cut dozens of one size, you may prefer up-grading to exact size templates.

Peaky and Spike are the names the late Doreen Speckmann gave these shapes, which she made famous around the world.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8289

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Multi-Size Half-Square Triangle

Marti Michell Multi-Size Half-Square Triangle

Ref: 12778

In stock

This tool makes it easy to cut any size half-square triangle from 1" to 6" every half-inch and trim the engineered corner just like those available in From Marti Michell exact-size templates.

A multi-size tool allows auditioning different size triangles and is an economical way to cut 11 different sizes with one tool.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8290

 

12.25

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Multi-Size Half Hexagon Ruler

Marti Michell Multi-Size Half Hexagon Ruler

Ref: 11266

In stock

1 piece for cutting 6 sizes of half-hexagons: 2, 2½, 3, 3½, 4 and 4½ inches on a finished side

A point-to-point half-hexagon template helps to eliminate set-in or “Y” seams in quilts that feature hexagon shapes.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8282

 

12.25

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Hexagon Ruler

Marti Michell Hexagon Ruler

Ref: 9536

In stock

This super-sized hexagon measures 24cm (9") from point to point. Use it to cut perfect hexagons from strips or fussy cut the largest size to get the most from dramatic prints like the Hana print shown left. The ruler can be used to create hexagons with a finished side length between 2" (5cm) and 4" (11.4cm) in half inch intervals. It comes with an instruction card on how to use it.

A free sheet on how to make the interlocking hexes construction method which was used to make the Kimono quilt featured on our 2008 fabric palettes catalogue is included with each ruler.

Produced by: Marti Michell

Part Number: 8060

 

16.65

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Interlocking Hexes Pattern (Marti Michell)

Interlocking Hexes Pattern (Marti Michell)

Ref: 9543

Pattern sheet and instructions for interlocking hexes as featured in Marti's Kimono quilt to the left.

Produced by: Marti Michell

 

1.00

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Kaleido-Ruler

Marti Michell Kaleido-Ruler

Ref: 877

In stock

Use this large ruler for cutting triangles for 6- to 16-inch blocks. One tool for cutting both triangles for Kaleidoscope-type blocks the easy, accurate way.

Make blocks like: Kaleidoscope, Spider Web, Crossed Canoes.

Produced by: Marti Michell

Part Number: 8642

 

16.65

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Small Kaleido-Ruler

Marti Michell Small Kaleido-Ruler

Ref: 876

In stock

Use this small ruler for cutting triangles for 2- to 8-inch blocks. One tool for cutting both triangles for Kaleidoscope-type blocks the easy, accurate way.

Make blocks like: Kaleidoscope, Spider Web, Crossed Canoes.

Produced by: Marti Michell

Part Number: 8641

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Log Cabin Ruler 1

Log Cabin Ruler 1" and 2"

Ref: 9235

In stock

If you want ease, efficiency and accuracy when cutting Log Cabin strips to exact size, look no further.

1" and 2 " finished strip widths for making Log Cabin blocks up to 14" Square.

Produced by: Marti Michell

Part Number: 8038

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Log Cabin Ruler 5/8

Log Cabin Ruler 5/8" and 1 1/4"

Ref: 9538

In stock

If you want ease, efficiency and accuracy when cutting Log Cabin strips to exact size, look no further.
5/8" and 1 1/4 " finished strip widths for making Log Cabin blocks up to 13 3/4" Square.

Produced by: Marti Michell

Part Number: 8058

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Log Cabin Ruler 3/4

Log Cabin Ruler 3/4" and 1 1/2"

Ref: 9234

In stock

If you want ease, efficiency and accuracy when cutting Log Cabin strips to exact size, look no further.

3/4" and 1 1/2 " finished strip widths for making Log Cabin blocks up to 13 1/2" Square.

Produced by: Marti Michell

Part Number: 8037

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Log Cabin Ruler 0.5

Log Cabin Ruler 0.5" and 1" Finished Strip Widths

Ref: 10960

In stock

Many of our customers asked for a Log Cabin Ruler for 1/2- and 1-inch finished strip widths, so we have added a fourth ruler to the Log Cabin series.

Two things contribute to making "square" Log Cabin blocks, and our Log Cabin rulers serve perfectly:

1. Cutting strips on lengthwise grain, so there is little to no stretch of the fabric as you sew.

2. Cutting strips to exact length, so every strip fits, every time.

All of our Log Cabin Rulers are used in the same way. Each ruler cuts 2 strip widths with a ratio of 2:1. The strip widths and strip lengths vary from ruler to ruler.

BONUS! The 2:1 ratio means you can also use these rulers to cut pieces for "curved" Log Cabin blocks, where one side of the block is composed of strips that are X-wide and the other side of the block has strips twice that wide. The 2:1 ratio gives a great "curved" look. When many blocks are sewn together, the gentle steps appear to make a curved line across the surface of the quilt.

Produced by: Marti Michell

Part Number: 8227

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Multi Size Fussy Cutter, Marti Michell
Multi Size Fussy Cutter, Marti Michell - view 1Multi Size Fussy Cutter, Marti Michell - view 2

Multi Size Fussy Cutter, Marti Michell

Ref: 13600

In stock

Today’s quilters have such wonderful fabric choices. It is so much fun to fussy cut and emphasize motifs that help tell the story or create a new design. The detailed lines in a regular ruler can be confusing. Besides you have to “do the math” to know where the center is or trust your “eyeball” measurements. You may not know when you will need it, but it is easy to see that the Fussy Cutter is “too handy not to have it on hand.”

All sizes are numbered for left or right handed use and marked with: • Center dot • Two 45° diagonal lines • Lines for cut size and 1/4-inch seam allowances.

5 Squares, 1", 2", 3", 4" and 5".

Produced by: Marti Michell

Part Number: 8297

 

11.40

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Deluxe Corner Trimmer and Hand Piecing Aid Marti Michell

Deluxe Corner Trimmer and Hand Piecing Aid Marti Michell

Ref: 10621

In stock

Includes 45, 53-1/2, 60, 90, 120 and 135 degree angles.

Improve your piecing by eliminating "dog ears" on patchwork triangles --and excess fabric on squares--before you sew.

Replicate From Marti Michell engineered corners on quick-cut pieces.

Confirm angles on quilt pieces you might have quick-cut with a ruler or even cut with scissors.

Mark the exact dot where seams will cross at the corners. Ideal for hand piecers or machine set-in seams.

Includes illustrated instructions.

If you are using our original Corner Trimmer 8064, you already know the excellent advantages of trimmed corners and you will appreciate the advantages of the Deluxe Corner Trimmer.

Produced by: Marti Michell

Part Number: 8217

 

11.40

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



60 Degree Corner Trimmer, Marti Michell

60 Degree Corner Trimmer, Marti Michell

Ref: 13599

In stock

5 finished sizes: 1, 1½, 2, 2½ and 3 inches

The 60° Corner Trimmer is handy for cutting off the dog ears on ruler-cut equilateral triangles plus other shapes in the 60° family.

BONUS: You can also use it to cut the 5 sizes of equilateral triangles listed above.

We measure most 60° family members by the length of the finished side.

The 3" triangle is a great size for a scrappy one-piece Thousand Pyramids quilt. Instructions are included.

Produced by: Marti Michell

Part Number: 8298

 

4.40

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Perfect Patchwork Corner Trimmer

Perfect Patchwork Corner Trimmer

Ref: 9573

In stock

Laser-cut acrylic Corner Trimmer with eight page booklet explaining the advantages of the double-blunt corners that lie at the heart of the Perfect Patchwork system. Includes instructions on making perfect square-within-square units, piecing binding strips and flying geese units from just this one template!

Produced by: Marti Michell

 

2.95



Drunkard's Path Templates

Drunkard's Path Templates

Ref: 7270

In stock

4 companion pieces for making 3", 3½" and 4" units.

Although the four pieces look the same the smaller of each pair is used to cut the “L” shape of each unit.

The four templates in this set are labeled A through D. They are used in pairs to make Drunkard's Path units in 3 sizes (3, 3 1/2 and 4 inches), plus larger sizes, if desired. Cut the "pie" shape from strips and the "L" shape from squares. You can rotary cut the squares, but if you own Sets A, B or C, you already have square templates that fit. Instructions feature 21 block variations.

Produced by: Marti Michell

Part Number: 8960

 

15.75

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Mariner's Compass 14in Template, Marti Michell
Mariner's Compass 14in Template, Marti Michell - view 1Mariner's Compass 14in Template, Marti Michell - view 2Mariner's Compass 14in Template, Marti Michell - view 3Mariner's Compass 14in Template, Marti Michell - view 4Mariner's Compass 14in Template, Marti Michell - view 5

Mariner's Compass 14in Template, Marti Michell

Ref: 13723

In stock

Template Set to make a 14" Finished Mariner's Compass circle.

6 pieces with engineered corners for perfect sewing alignment and an 8.5 x 11 step-by-step instruction booklet. Just some of the variations are shown in the images. The basic 16 Point Compass is made with just 4 templates.

The instruction booklet includes:

• • Colour photos and a colouring page

•• Yardage for all positions in one block

• • Cutting and sewing 16 and 32 point Compasses

• • Making split points and "halos"

• • Full-size pattern for making a pieced center (scroll down for closeup)

• • Discussion on using mirrors to preview designs

• • Finishing instructions include line-and-turn appliqué for the center circle

• • Reverse appliqué technique for the background square

Produced by: Marti Michell

Part Number: 8703

 

22.75

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Mariner's Compass 20in Template, Marti Michell
Mariner's Compass 20in Template, Marti Michell - view 1Mariner's Compass 20in Template, Marti Michell - view 2Mariner's Compass 20in Template, Marti Michell - view 3Mariner's Compass 20in Template, Marti Michell - view 4Mariner's Compass 20in Template, Marti Michell - view 5

Mariner's Compass 20in Template, Marti Michell

Ref: 13724

In stock

Template Set to make a 20" Finished Mariner's Compass circle.

6 pieces with engineered corners for perfect sewing alignment and an 8.5 x 11 step-by-step instruction booklet. Just some of the variations are shown in the images. The basic 16 Point Compass is made with just 4 templates.

The instruction booklet includes:

• • Colour photos and a colouring page

•• Yardage for all positions in one block

• • Cutting and sewing 16 and 32 point Compasses

• • Making split points and "halos"

• • Full-size pattern for making a pieced center (scroll down for closeup)

• • Discussion on using mirrors to preview designs

• • Finishing instructions include line-and-turn appliqué for the center circle

• • Reverse appliqué technique for the background square

Produced by: Marti Michell

Part Number: 8704

 

33.25

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Multi Size Tessellating Windmill Tool One Piece Size

Multi Size Tessellating Windmill Tool One Piece Size

Ref: 10623

In stock

For 2" to 9" finished blocks

Method! Cut the pieces from stacked squares and all pieces are automatically on the correct grainline for their position in the block! Then use our easy “Leap Frog” system to assemble blocks and rows at the same time—The quilt almost makes itself!

Includes 12-page booklet on cutting all sizes and using the "Leap Frog" chain piecing method.

Produced by: Marti Michell

Part Number: 8219

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Drunkard's Path Template Set 6

Drunkard's Path Template Set 6"-7"

Ref: 9185

In stock

Large Drunkard's Path Template Set for making 6", 6 1/2" and 7" units

They work the same way as the original Drunkard's Path Set they just create bigger pieces. The original set includes 21 block variations ~ you can make all those blocks with these templates, too. This instruction set includes 6 variations and two quilt patterns.

Produced by: Marti Michell

Part Number: 8024

 

16.65

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell One-derful One-Patch- 60 Degree Diamond and Triangle

Marti Michell One-derful One-Patch- 60 Degree Diamond and Triangle

Ref: 10959

In stock

1 piece for cutting 60-degree diamonds and their matching 60-degree triangles in 7 finished sizes (measured on a side) 2 to 4 inches in half inch increments, including BONUS 2-1/4 inch size. (Includes 2 and 3 inch sizes that are full size in Sets G and H, respectively.)

Perfect for Six-Pointed Stars and other 60-degree block designs. Join rows of alternating 60-degree diamonds for a Chevron or Zigzag quilt.

Produced by: Marti Michell

Part Number: 8228

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Pineapple Ruler 1
Marti Michell Pineapple Ruler 1" Finished Strips - view 1Marti Michell Pineapple Ruler 1" Finished Strips - view 2

Marti Michell Pineapple Ruler 1" Finished Strips

Ref: 10961

In stock

Cutting exact size pieces from strips is easier, more efficient, and -- you will be surprised! -- more accurate than paper piecing Pineapple blocks! We've gone Pineapple crazy, and we think you will, too, once you try this method.

Cut strips the appropriate width. Then use the Pineapple Ruler to cut the exact size and shape of the graduated pieces. Use the triangle template to cut the center and corner triangles. Sew the pieces together and press as you go. No paper to tear away! No squaring up after every set of strips is sewn! Very little waste. Perfect!

Use Pineapple Ruler #8230 to cut 1-in. finished Pineapple strips for 8-, 10-, 12- and 14-inch finished blocks. Marti likes this strip width for wallhangings, table runners and other small items, as well as smaller prints..

Produced by: Marti Michell

Part Number: 8230

 

14.85

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Pineapple Ruler 1 1/4
Marti Michell Pineapple Ruler 1 1/4" Finished Strips - view 1Marti Michell Pineapple Ruler 1 1/4" Finished Strips - view 2

Marti Michell Pineapple Ruler 1 1/4" Finished Strips

Ref: 10962

In stock

Was £14.85 now down to £11.85

Cutting exact size pieces from strips is easier, more efficient, and -- you will be surprised! -- more accurate than paper piecing Pineapple blocks! We've gone Pineapple crazy, and we think you will, too, once you try this method.

Cut strips the appropriate width. Then use the Pineapple Ruler to cut the exact size and shape of the graduated pieces. Use the triangle template to cut the center and corner trianlges. Sew the pieces together and press as you go. No paper to tear away! No squaring up after every set of strips is sewn! Very little waste. Perfect!

Use Pineapple Ruler #8231 to cut 1-1/4-in. finished Pineapple strips for 10-, 12-1/2- and 15-inch blocks. Marti likes this size for making blocks for bed quilts and for using with big bright prints.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8231

 

11.85

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Pineapple Ruler 1/2
Marti Michell Pineapple Ruler 1/2" Finished Strips - view 1Marti Michell Pineapple Ruler 1/2" Finished Strips - view 2

Marti Michell Pineapple Ruler 1/2" Finished Strips

Ref: 10963

In stock

Cutting exact size pieces from strips is easier, more efficient, and -- you will be surprised! -- more accurate than paper piecing Pineapple blocks! We've gone Pineapple crazy, and we think you will, too, once you try this method.

Cut strips the appropriate width. Then use the Pineapple Ruler to cut the exact size and shape of the graduated pieces. Use the triangle template to cut the center and corner trianlges. Sew the pieces together and press as you go. No paper to tear away! No squaring up after every set of strips is sewn! Very little waste. Perfect!

Use Pineapple Ruler #8262 to cut 1/2-in. finished Pineapple strips for 4-, 5- and 6-inch finished blocks. This size is great for miniature quilts and small projects.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8262

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell Long Skinny Sashing Star Ruler

Marti Michell Long Skinny Sashing Star Ruler

Ref: 10964

In stock

Similar to our original Sashing Star Set. Use it to make 2, 3 and 4 inch finished width sashing stars with long skinny points (Peaky & Spike triangles) and to create "circular" frames for 3 sizes of quilt blocks.

Produced by: Marti Michell

Material: Acrylic

Part Number: 8232

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell My Favorite Mitering Ruler 8

Marti Michell My Favorite Mitering Ruler 8" x 24"

Ref: 8641

In stock

Features our special engineered "no dog ears" corner. Perfect for cutting 45-degree diamonds and mitered corners on quilt borders. Also perfect for mitered sashings and blocks like Attic Windows. Can be used the same way you use a 6- x 24-inch ruler, too.

Purple verticals marked every 1/8-inch to make cutting strips easier. Different 1/8-, 1/4- and 1/2-inch lines for easier positioning; heavier lines every 1/2-inch for easier counting.

Produced by: Marti Michell

Part Number: 8002

 

21.85

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Small Diagonal Set Full Triangle Ruler 5-16

Small Diagonal Set Full Triangle Ruler 5-16" Blocks

Ref: 9913

In stock

Use this no-flip, full triangle ruler to cut corner and setting triangles for 2-1/2" to 10" finished size blocks. 14 1/2" wide

Produced by: Marti Michell

Part Number: 8105

 

17.45

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell 6

Marti Michell 6" Equilateral Triangle Tool (60 degree)

Ref: 8279

In stock

For cutting 2" to 6" triangles - makes Spider Web, Thousand Pyramid, etc.

Making quilts with equilateral triangles has never been easier—especially whenusing Marti's hexagon and diamond templates. They're great for Baby Blocks and Thousand Pyramids quilts, but they are perfect for patterns like Seven Sisters that combine hexagons or diamonds with equilateral triangles. The best part is, the dog ears are automatically removed as you cut the pieces, resulting in perfectly matched pieces for accurate sewing and less bulk at intersections so pressing is easier, too.

Other equilateral triangle rulers measure the height of the triangle from the center of the bottom to the top point. But what size is that? It depends.

A triangle that measures 3 inches through the center is actually bigger than one that measures 3 inches on a side. A 3-inch tall equilateral triangle is fine for patterns like A Thousand Pyramids: But for designs such as Sugarloaf Mountain, you need an equilateral triangle with the same side measurement as the sides of the triangular unit to which it will be sewn. That is when our size-defined pieces work perfectly!

All From Marti Michell 60-degree family members are size-defined by the length of the finished side. We made this decision for quiltmaking projects because the finished side is the only measurement that is common to all of the shapes in the family.

Pieces cut with these rulers fit perfectly with hexagon Template Sets G, H and Mini Geometrics Set N.

You'll love making hexagon quilts with our templates and triangle rulers!

Produced by: Marti Michell

Part Number: 8962

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Marti Michell 9

Marti Michell 9" Equilateral Triangle Tool (60 degree)

Ref: 8280

In stock

For cutting 3" to 9" triangles-spiders web, etc.

Making quilts with equilateral triangles has never been easier—especially whenusing Marti's hexagon and diamond templates. They're great for Baby Blocks and Thousand Pyramids quilts, but they are perfect for patterns like Seven Sisters that combine hexagons or diamonds with equilateral triangles. The best part is, the dog ears are automatically removed as you cut the pieces, resulting in perfectly matched pieces for accurate sewing and less bulk at intersections so pressing is easier, too.

Other equilateral triangle rulers measure the height of the triangle from the center of the bottom to the top point. But what size is that? It depends.

A triangle that measures 3 inches through the center is actually bigger than one that measures 3 inches on a side. A 3-inch tall equilateral triangle is fine for patterns like A Thousand Pyramids: But for designs such as Sugarloaf Mountain, you need an equilateral triangle with the same side measurement as the sides of the triangular unit to which it will be sewn. That is when our size-defined pieces work perfectly!

All From Marti Michell 60-degree family members are size-defined by the length of the finished side. We made this decision for quiltmaking projects because the finished side is the only measurement that is common to all of the shapes in the family.

Pieces cut with these rulers fit perfectly with hexagon Template Sets G, H and Mini Geometrics Set N.

You'll love making hexagon quilts with our templates and triangle rulers!

Produced by: Marti Michell

Part Number: 8963

 

17.50

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Winding Ways Template 8 1/2

Winding Ways Template 8 1/2" Set

Ref: 9186

In stock

3 pcs., makes a 8 1/2"" finished block. Three templates are all that is required to make a quilt that is easily machine-pieced (or hand-pieced if you prefer). The beauty of the Winding Ways design is that with effective use of value (lights and darks) secondary patterns form within the quilt as shown left.

Instructions on making a block and planning a quilt are included as well as a Colouring Sheet.

Produced by: Marti Michell

Part Number: 8974

 

16.65

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Winding Ways Colouring Sheet (free with Template Set)

Winding Ways Colouring Sheet (free with Template Set)

Ref: 9514

Produced by: Marti Michell

Part Number: 9514

 

1.00

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Giant Dahlia Template Set

Giant Dahlia Template Set

Ref: 7089

In stock

9 Acrylic Templates for rotary cutting Giant Dahlia. Complete instructions for Queen/Double Giant Dahlia Quilt, including border. Use paper patterns included or Set B Perfect Patchwork Templates to cut border.

Queen/Double Giant Dahlia Quilt 215 x 258cm (84.5" x 101.5")

Produced by: Marti Michell

Part Number: 8949

 

43.75

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Large Diagonal Set Triangle Ruler

Large Diagonal Set Triangle Ruler

Ref: 8642

In stock

Use this ruler to cut triangles for diagonal set quilts and borders - and blocks.

6" to 16" block size every half inch

Corner traingles-setting traingles
Border setting traingles
Corner traingles for square in a square blocks

Produced by: Marti Michell

Part Number: 8968

 

17.50

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Double Wedding Ring Template Set by Marti Michell

Double Wedding Ring Template Set by Marti Michell

Ref: 8981

In stock

Double Wedding Ring Template set using laser cut rotary cutting templates with holes to make matching seams easy. The finished circle is approximately 17" based on a 12" square and can be made with a solid arc, a pieced arc or no arc at all.

The 28-page booklet includes thorough well-illustrated instructions using Marti's unique construction method on Double Wedding ring, Robbing Peter to Pay Paul, Lafayette's Orange Peel, Improved Nine Patch and Patti's Improved Pinwheel. Yardage requirements for multiple sizes and designs are given. A Pickle Dish variation using the paper piecing method which can be scanned or photocopied is also included.

Produced by: Marti Michell

Part Number: 8017

 

34.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Dresden Plate Template Set

Dresden Plate Template Set

Ref: 8311

These laser cut, Perfect Patchwork Templates are accurate for rotary cutting 1/4" seams included. Alignment holes in the templates make matching and marking points easy. Can be used for both hand and machine piecing. The petals can be rounded or pointed or a variety of both. Set inculdes four templates plus full instructions and design variations.

Makes 7", 10 1/2" and 12" Dresden Plates whcih make 9", 12" and 15" blocks.

Produced by: Marti Michell

Part Number: 8965

 

17.50

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Mini Dresden Plate Template Set

Mini Dresden Plate Template Set

Ref: 8312

In stock

These laser cut, Perfect Patchwork Templates are accurate for rotary cutting 1/4" seams included. Alignment holes in the templates make matching and marking points easy. Can be used for both hand and machine piecing. The petals can be rounded or pointed or a variety of both. Set inculdes four templates plus full instructions and design variations.

Makes 3", 5 1/2" Dresden Plates whcih make 4" and 6" blocks.

Produced by: Marti Michell

Part Number: 8964

 

13.95

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Flying Geese Ruler

Flying Geese Ruler

Ref: 9187

In stock

The double-blunt corners make cutting and piecing Flying Geese units fast and accurate. Makes 5 sizes of flying geese from 2½" x 5" to 4½" x 9". More economical than other methods such as foundation piecing as you don’t waste the corners! One ruler cuts both the small and large triangles.

Produced by: Marti Michell

Part Number: 8022

 

13.15

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Show First 30 Product(s)

Recently Viewed