1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Ruler Accessories

EverSewn Ruler Holder Gripper
EverSewn Ruler Holder Gripper  - view 1EverSewn Ruler Holder Gripper  - view 2

EverSewn Ruler Holder Gripper

Ref: 11711

In stock

4" ruler grip in aqua. Suction diameter is 25mm

Lift rulers and templates without damaging fingernails. Use to enhance marking by helping holding templates in place.

Place and press the suction cups of your EverSewn ruler grip onto your ruler or template of choice.

Measure easily, comfortable and accurately. The suction cup can be released by slightly pressing on the ruler and lifting up on the holder.

Produced by: Eversewn

Part Number: F0180

 

5.40



Double Patchwork Ruler Grip by Omnigrid

Double Patchwork Ruler Grip by Omnigrid

Ref: 10302

In stock

Double Suction Cups for patchwork rulers. Provides a steady grip on your ruler and keeps fingers away from rotary blade when cutting. *Works on clean, smooth surface rulers or templates * Attaches in seconds *Easy to use!

Instructions:
1. Flip up both black levers to release suction cups. 2. Place Ruler Grip against surface. 3. Gently press down on Grip while flipping down both levers. 4. Position ruler or template for cutting and press down on Grip to keep ruler in place. To remove Ruler Grip, flip up both levers and slide finger under suction cups to break the seal.

Please note: Not suitable for use with the TrueCut range of patchwork rulers.

Produced by: Omnigrid

Part Number: 2229

 

13.50

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



TrueGrips Ruler Adhesive Rings from TrueCut

TrueGrips Ruler Adhesive Rings from TrueCut

Ref: 10534

In stock

For straight, accurate cuts, you need to keep your ruler from slipping. TrueGrips help you by adding a completely nonskid surface to any ruler. 15 large grips and 15 small grips per pack.

The TrueGrips can be simply attached to any ruler helping to prevent your ruler slippling, increasing safety and accuracy. Transparent for easy fabric visibility.

Produced by: TrueCut

Part Number: TCGRIP

 

4.95



Sariditty Butterfly Glitter Grippers - Pack of 27
Sariditty Butterfly Glitter Grippers - Pack of 27 - view 1Sariditty Butterfly Glitter Grippers - Pack of 27 - view 2Sariditty Butterfly Glitter Grippers - Pack of 27 - view 3

Sariditty Butterfly Glitter Grippers - Pack of 27

Ref: 13820

In stock

Stick these handy grippers to the underside of your rulers and cutting templates to reduce slipping and sliding over the fabric. Recommend a 3 pressure point solution per ruler or template.

Never lose your clear templates and rulers again with these fun Butterfly Glitter Grippers.

27 per pack.

Produced by: Sariditty

Part Number: SA-BFLYGRIPSET

 

9.95



Glow-Line Tape

Glow-Line Tape

Ref: 8785

In stock

Glow-Line, a transparent, fluorescent tape for highlighting lines and shapes on rulers.

Apply Glow-Line to the underside of a ruler to highlight measurements or shapes. Saves time and avoids errors when cutting multiples of the same shape.

Glow-Line is low tack - it will not leave residue on your ruler. Three rolls per pack - pink orange and yellow. Each roll has 7 yards of ¼" wide tape.

Produced by: Omnigrid

Part Number: 610600

 

3.75



Invisi-Grip Roll from Omnigrid 12 1/2

Invisi-Grip Roll from Omnigrid 12 1/2" x 1 yard

Ref: 8526

In stock

Invisigrip is a clear non-slip material that is applied to the underside of rulers and templates. It is easy to apply and does not obscure the markings. When you want to apply pressure it prevents rulers from slipping but slides easily when no pressure is applied.

Produced by: Omnigrid

Part Number: 2101

 

6.35

Spend 35 on rotary cutting equipment from Marti Michell, Omnigrid, Fiskars, Prym or Ansio and get the Perfect Patchwork Corner Trimmer free. Remember to add the Corner Trimmer to your basket to get the reward.

Corner Trimmer (9573)



Fabric Grips

Fabric Grips

Ref: 437

In stock

A fabric grip on the corners of some patchwork rulers and templates will help prevent slipping when marking or using rotary cutters. Prevents templates and rulers slipping. 36 per pack.

Produced by: Collins

Part Number: 18C

 

4.10



Handi Grip

Handi Grip

Ref: 11042

In stock

Keep rulers and templates under control with self-adhesive gripper tape.

12 adhesive grip strips (1" x 5"). Trim to size and remove adhesibe backing to attach to rulers and rotary cutting templates

For use on any quiling ruler or template.

Holds rulers very well, escpecially for Free Machine Quilting on the sit-down and stand-up machines. Take care with fragile fabrics such as silk as the grip can be rough.

Store rulers separately to stop rulers getting scratched

Produced by: Handi Quilter

Part Number: HG10510

 

8.95



Westalee Stable Tape, 12 Pack

Westalee Stable Tape, 12 Pack

Ref: 13161

In stock

Stable Tape is a self adhesive tape to help keep rulers and templates in place. Great for both domestic and longarm users. Packets of 12 Strips - cut to size

Strips are approximately 15cm long and are 1.2cm wide. They are only .6mm thick.

Simply cut to size and remove the backing paper - press in place on your template.

A 1"- 1 1/2" piece of Stable Tape placed at each side of the template is all that is needed you don't need to cover the whole template.

Produced by: Westalee

Part Number: WA-ST12

 

20.50



Westalee Stable Tape

Westalee Stable Tape

Ref: 11828

In stock

Stable Tape is a self adhesive tape to help keep rulers and templates in place. Great for both domestic and longarm users. Packets of 5 Strips - cut to size

Strips are approximately 15cm long and are 1.2cm wide. They are only .6mm thick.

Simply cut to size and remove the backing paper - press in place on your template.

A 1"- 1 1/2" piece of Stable Tape placed at each side of the template is all that is needed you don't need to cover the whole template.

Produced by: Westalee

Part Number: WA-ST

 

10.25



Prym Patchwork Ruler Organiser
Prym Patchwork Ruler Organiser  - view 1Prym Patchwork Ruler Organiser  - view 2Prym Patchwork Ruler Organiser  - view 3Prym Patchwork Ruler Organiser  - view 4

Prym Patchwork Ruler Organiser

Ref: 13644

In stock

This Prym practical ruler organiser in high-quality plastic tidies up your sewing area. Patchwork and dressmaker's ruler and stencils can be safely stored here and are always ready to hand. The four short and six long slots offer storage space for all current sizes of rulers. The ruler organiser can be positioned in the work area, where its non-slip rubber feet ensure its stability. Alternatively, the two holes on the reverse allow it to be hung on the wall (the screws for this are not included in the pack). Contents not included.

Ideal for patchwork and handicrafts
6 long and 4 short slots for all current sizes of ruler
Non-slip rubber feet ensure stability
Wall mounted option
Size: 11 x 21 cm

Produced by: Prym

Material: Plastic

Part Number: 611502

 

16.95



Milward Small Ruler Rack Holder 4 Slot (25cm x 10cm)
Milward Small Ruler Rack Holder 4 Slot (25cm x 10cm) - view 1Milward Small Ruler Rack Holder 4 Slot (25cm x 10cm) - view 2Milward Small Ruler Rack Holder 4 Slot (25cm x 10cm) - view 3

Milward Small Ruler Rack Holder 4 Slot (25cm x 10cm)

Ref: 12968

In stock

This Ruler Rack or Holder is an ideal solution for safely storing quilting rulers or templates, making them accessible and less prone to damage.

Made from beautiful and durable beech wood. Dimensions: 25 x 10cm

Produced by: Milward

Part Number: 2159003

 

7.50



Milward Large Ruler Rack Holder 5 Slot (50 x 10cm)
Milward Large Ruler Rack Holder 5 Slot (50 x 10cm) - view 1Milward Large Ruler Rack Holder 5 Slot (50 x 10cm) - view 2Milward Large Ruler Rack Holder 5 Slot (50 x 10cm) - view 3

Milward Large Ruler Rack Holder 5 Slot (50 x 10cm)

Ref: 12970

In stock

This Ruler Rack or Holder is an ideal solution for safely storing quilting rulers or templates, making them accessible and less prone to damage.

Made from beautiful and durable beech wood. Dimensions: 50 x 10cm

Produced by: Milward

Part Number: 2159004

 

10.75



Recently Viewed