Sewing-Machine-Feet.html

Sewing Machine Feet, Patchwork and Quilting

Below is our selection of Sewing Machine Feet that you can swap on your sewing machine. The feet listed below are better for quilting or patchwork or for piecing curves than the generic feet found on many machines.

If you are looking for Westalee Sewing Machine Feet for Free Motion Quilting then you can find them under our Westalee Section here.

Big Foot Low Shank Machine Quilting/Darning Foot

Ref: 7195

In stock

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

Low Shank - Fits Low Shank and Pfaff machines (but not the Pfaff 1200 Series). With a Low Shank Adapter this model can be used with Bernina machines.

For Bernina sewing machines there are two adapters that enable you to convert a Big Shank foot please see the two options at the bottom of this page for which Adapter is appropriate

Produced by: Little Foot

Part Number: BFL

£25.96

Quantity:

Please enter your sewing machine make and model number.

Big Foot Viking Machine Quilting/Darning Foot

Ref: 7433

In stock

Was £25.95 now down to £19.95

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

Fits some Viking Husqvarna machines. Where it doesn't the Low Shank fitting will be required.

List of Viking Machines for Big Foot and Little Foot

These tables should help you to locate the appropriate foot for Viking Husqvarna machines.

The Designer 1 has a special foot so neither the Little Foot nor the Big Foot will fit the machine.

Little Foot

Low Shank Little Foot (Ref 475)	Viking Snap-On Little Foot (Ref 8348)
200 Series, 300 Series, 400 Series, Lily Series, Rose Series	#1, #1 Plus, 90 Series, 100 Series, 600 Series, 900 Series, 1000 Series, 1100 Series.

Big Foot

Low Shank Big Foot (Ref 7195)	Viking Shank Big Foot (Ref 7433)
200 Series, 300 Series, 400 Series, Lily Series, Rose Series	#1, #1 Plus, 90 Series, 100 Series, 600 Series, 900 Series, 1000 Series, 1100 Series.

Produced by: Little Foot

Part Number: BFV

£19.96

Quantity:

Please enter your sewing machine make and model number.

Little Foot Low Shank 1/4" Patchwork Foot

Ref: 475

In stock

The Little Foot is a clear plastic (Lexan (R)) foot for sewing accurate 1/4" seams. The right edge is 1/4" from the centre while the left edge is approximately 3/8" from the centre giving you better control as it covers most of the feed dogs. It also has 1/4" notches in front and behind the needle position, designed to help with starting, stopping and pivoting.

Fits Low Shank machines and Featherweights. This is the most common fitting . With a Low Shank Adapter this model can be used with Bernina machines.

For Bernina sewing machines there are two adapters that enable you to convert a Big Shank foot please see the two options at the bottom of this page for which Adapter is appropriate

Produced by: Little Foot

Part Number: LF101

£21.00

Quantity:

Please enter your sewing machine make and model number.