1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Sewing Machine Feet

Sewing Machine Feet, Patchwork and Quilting

Below is our selection of Sewing Machine Feet that you can swap on your sewing machine. The feet listed below are better for quilting or patchwork or for piecing curves than the generic feet found on many machines.

If you are looking for Westalee Sewing Machine Feet for Free Motion Quilting then you can find them under our Westalee Section here.

Big Foot Low Shank Machine Quilting/Darning Foot

Big Foot Low Shank Machine Quilting/Darning Foot

Ref: 7195

In stock

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

Low Shank - Fits Low Shank and Pfaff machines (but not the Pfaff 1200 Series). With a Low Shank Adapter this model can be used with Bernina machines.

For Bernina sewing machines there are two adapters that enable you to convert a Big Shank foot please see the two options at the bottom of this page for which Adapter is appropriate

Produced by: Little Foot

Part Number: BFL

 

25.95



Big Foot High Shank Machine Quilting/Darning Foot

Big Foot High Shank Machine Quilting/Darning Foot

Ref: 8347

In stock

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

High Shank machines including the Brother PQ1500, Pfaff 1200 Series, the Elna 8006, 9006 and CE-20 and New Home 8000.

Produced by: Little Foot

Part Number: BFH

 

25.95



Big Foot Viking Machine Quilting/Darning Foot

Big Foot Viking Machine Quilting/Darning Foot

Ref: 7433

In stock

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

Fits some Viking Husqvarna machines. Where it doesn't the Low Shank fitting will be required.

List of Viking Machines for Big Foot and Little Foot

These tables should help you to locate the appropriate foot for Viking Husqvarna machines.

The Designer 1 has a special foot so neither the Little Foot nor the Big Foot will fit the machine.

Little Foot

Low Shank Little Foot (Ref 475)Viking Snap-On Little Foot (Ref 8348)
200 Series, 300 Series, 400 Series, Lily Series, Rose Series#1, #1 Plus, 90 Series, 100 Series, 600 Series, 900 Series, 1000 Series, 1100 Series.

Big Foot

Low Shank Big Foot (Ref 7195)Viking Shank Big Foot (Ref 7433)
200 Series, 300 Series, 400 Series, Lily Series, Rose Series#1, #1 Plus, 90 Series, 100 Series, 600 Series, 900 Series, 1000 Series, 1100 Series.

Produced by: Little Foot

Part Number: BFV

 

25.95



Big Foot Singer Slant Machine Quilting/Darning Foot

Big Foot Singer Slant Machine Quilting/Darning Foot

Ref: 7196

In stock

Enhance your patchwork and quilting experience with this giant darning foot which is designed to give more control of free-motion quilting and embroidery. The large clear plastic ring gently pushes the fabric down around the needle to reduce the chance of puckering. One customer likened the difference between her old free-motion foot and the Big Foot to the difference between driving a Fiesta and a Ferrari!

If you have a Singer machine and the foot slants forwards from the top of the shank then you will need a Singer Slant Foot.

Produced by: Little Foot

Part Number: BFS

 

25.95



Little Foot Low Shank 1/4

Little Foot Low Shank 1/4" Patchwork Foot

Ref: 475

In stock

The Little Foot is a clear plastic (Lexan (R)) foot for sewing accurate 1/4" seams. The right edge is 1/4" from the centre while the left edge is approximately 3/8" from the centre giving you better control as it covers most of the feed dogs. It also has 1/4" notches in front and behind the needle position, designed to help with starting, stopping and pivoting.

Fits Low Shank machines and Featherweights. This is the most common fitting . With a Low Shank Adapter this model can be used with Bernina machines.

For Bernina sewing machines there are two adapters that enable you to convert a Big Shank foot please see the two options at the bottom of this page for which Adapter is appropriate

Produced by: Little Foot

Part Number: LF101

 

21.00



Little Foot Snap On 1/4

Little Foot Snap On 1/4" Patchwork Foot

Ref: 8346

In stock

The Little Foot is a clear plastic (Lexan (R)) foot for sewing accurate 1/4" seams. The right edge is 1/4" from the centre while the left edge is approximately 3/8" from the centre giving you better control as it covers most of the feed dogs. It also has 1/4" notches in front and behind the needle position, designed to help with starting, stopping and pivoting.


Fits most Janome (New Home) snap-on fittings, and the Elna 8006, 9006 and CE-20.

Produced by: Little Foot

Part Number: LF106

 

21.00



Little Foot Viking Snap On 1/4

Little Foot Viking Snap On 1/4" Patchwork Foot

Ref: 8348

In stock

The Little Foot is a clear plastic (Lexan (R)) foot for sewing accurate 1/4" seams. The right edge is 1/4" from the centre while the left edge is approximately 3/8" from the centre giving you better control as it covers most of the feed dogs. It also has 1/4" notches in front and behind the needle position, designed to help with starting, stopping and pivoting.

Fits some of the Viking Husqvarna Snap-on fittings. Where it doesn't the Low Shank fitting will be required.

Produced by: Little Foot

Part Number: LF108

 

21.00



Little Foot Singer Slant 1/4

Little Foot Singer Slant 1/4" Patchwork Foot

Ref: 476

In stock

The Little Foot is a clear plastic (Lexan (R)) foot for sewing accurate 1/4" seams. The right edge is 1/4" from the centre while the left edge is approximately 3/8" from the centre giving you better control as it covers most of the feed dogs. It also has 1/4" notches in front and behind the needle position, designed to help with starting, stopping and pivoting.

If you have a Singer machine and the foot slants forwards from the top of the shank then you will need a Singer Slant Foot.

Produced by: Little Foot

Part Number: LF109

 

21.00



Curve Master Presser Foot - Low, High and Snap-on Shank

Curve Master Presser Foot - Low, High and Snap-on Shank

Ref: 8743

In stock

Curve Master makes machine piecing curves a breeze! There is no pinning or clipping required - after aligning the edges of the pieces, just "encourage" the fabrics to meet against the 1/4" seam guide.

Will fit most machines.
-Berninas need an adapter. See reference 8036 and 8357 to find out which adaptor you need.
-Will not fit the Pfaff GrandQuilter or the Janome 1600PQC

This item works especially well with the Pointed Tweezers and the Wooden Seam Roller to help you manipulate your fabric and make nice flat seams as you use the Curve Master.

Produced by: Curve Master

Part Number: CM008

 

24.95



Piping Foot 1/8

Piping Foot 1/8" Low Shank

Ref: 9173

In stock



Produced by: Cotton Patch

Part Number: 9173

 

5.95



Janome Convertible Free Motion Quilting Foot Set for 1600P

Janome Convertible Free Motion Quilting Foot Set for 1600P

Ref: 10451

In stock

Made specifically for the 1600P Series of machines, this is an industrial shank version of the popular convertible free motion foot set. The set includes foot holder, open toe and closed toe feet and a darning plate for table top free-motion quilting. The feet are streamlined for improved visibility and the industrial construction reduces vibration and provides professional-level durability. This Foot Set can be further enhanced with Free Motion Frame Quilting Foot Set, 10452.

Also fits the Pfaff Grand Quilter the Viking /Husqvarna Mega Quilter and the Janome 6600

Janome Part Number: 767433004

Produced by: Janome

Part Number: 767433004

 

49.95



Janome Free Motion Frame Quilting Feet Set for 1600P

Janome Free Motion Frame Quilting Feet Set for 1600P

Ref: 10452

In stock

This set includes ¼" Ruler Foot and Open-Toe Frame Quilting Foot, which are designed specifically for frame quilting, the forte of the new 1600P-QC. Please note these feet need the Free Motion Quilting Foot Set 10451 to fit correctly and operate.

The ¼" Ruler Foot as a high 'heel' and ½" diameter for free-motion quilting with a ¼" thick quilt rulers and long arm quilting templates.

The Open-toe Frame Quilting foot has an opening that faces sideways to provide a clear view of your work when standing at the handles of a quilt frame.

Also fits the Pfaff Grand Quilter the Viking /Husqvarna Mega Quilter and the Janome 6600

Janome Part Number: 767434005

Produced by: Janome

Part Number: 767434005

 

20.50



Deluxe Open Toe Embroidery Foot

Deluxe Open Toe Embroidery Foot

Ref: 8035

In stock

Was £7.50 now down to £5.50

This Open toe Embroidery foot is perfect for decorative stitches, satin stitch and Invisible Machine Applique - a clear view of the needle means that you can see where you are going. the cut-away underneath means that stiches don't get bunched up.

Produced by: Nifty Notions

Part Number: 7612

 

5.50



Walking Foot for Low Shank Machines

Walking Foot for Low Shank Machines

Ref: 8308

In stock

A Walking Foot enables quilted lines to be sewn accurately and evenly. The top and bottom layers are moved through the machine at the same rate. Suitable for machines that take generic Low Shank feet.

NOT suitable for use on a Bernina with Low Shank Adapter.

Produced by: Cotton Patch

Part Number: 8308

 

23.95



Bernina Low Shank Adapter 8036

Bernina Low Shank Adapter 8036

Ref: 8036

In stock

Use this adapter to convert your Bernina to using with lots of Low Shank Feet such as the Curvemaster, Big Foot and Little Foot.

Bernina Low Shank Adapter - you will need this version if you have a Bernina that is older than the more recent 100 series - the 700, 800, 900, 1000, 1100, 1200, 1500 or 1600 series. eg 1130, 1230, 1260

We only recommend using a Bernina Walking foot and not a Low Shank Adapter with a Low Shank Foot.

Produced by: Bernina

Part Number: 032705.70.00

 

13.50



Bernina Low Shank Adapter 75

Bernina Low Shank Adapter 75

Ref: 8357

In stock

Use this adapter to convert your Bernina to using with lots of Low Shank Feet such as the Curvemaster, Big Foot and Little Foot. Not recommended for the Westalee Ruler Foot as it is slightly longer than the Bernina #77 Adapter.

Bernina Low Shank Adapter - you will need this version if you have a recent Bernina that is from the 100 series - 140,150,160,170,180 or 145, 155 etc.

Fits Bernina 100 series and above machines, Virtuosa, Artista and Aurora 440.

Bernina 75 Adapter

Produced by: Bernina

Part Number: 03272.70.00

 

17.40



Bernina Ruffler Adapter #77

Bernina Ruffler Adapter #77

Ref: 12579

In stock

Adapter shank # 77 (short) is the shortened version of Adapter shank # 75 (standard).

Serving as a connecting piece between needle bar and accessory, Adapter shank # 75 (standard) allows other manufacturers' presser feet to be used on BERNINA machines.
If these feet are short-shanked, they won't fit on the machine's standard holder without an adapter.

By contrast, Adapter shank # 77 (short) is used e.g. with BERNINA sewing accessories such as Simple binder # 85 or Ruffler attachment # 86, and Westalee Ruler feet.

Bernina 77 Adapter

Produced by: Bernina

Part Number: 0083687000

 

16.95



Recently Viewed