1. Cotton Patch HomeHome
  2. LoginLogin
  3. Your Basket
    View Basket
  4. CheckoutCheckout

Vilene Decovil

Vilene Decovil Interfacing (per 1/4 metre)
Vilene Decovil Interfacing (per 1/4 metre) - view 1Vilene Decovil Interfacing (per 1/4 metre) - view 2

Vilene Decovil Interfacing (per 1/4 metre)

Ref: 10614

In stock

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown for this Vilene Decovil is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Decovil is a fusible nonwoven interfacing with a leather-like (suede) feel. Ideally suited for the creation of hats, belts, bags and small fabric bowls etc.

Advantages:
Dimensionally stable
Resilient
Extremely tear resistant
Non-fraying
Resistant to bending

Method of use:

First iron the fabrics at length with steam to avoid any shrinkage later on. Allow the fabrics to dry completely. Place the interfacing with the coated side on the wrong side of the fabric. Then cover with a damp cloth and press the iron carefully for about 6 seconds, step by step each area; iron setting: wool.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable up to 40 °C in the gentle cycle or dry cleanable

Colour: Beige,

Width 90 cm

Produced by: Vilene

Part Number: DECOVIL

 

4.23



Vilene Decovil Light Interfacing (per 1/4 metre)

Vilene Decovil Light Interfacing (per 1/4 metre)

Ref: 11000

In stock

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

DecovilLight is a fusible nonwoven interfacing with a leather-like (suede) feel. Ideally suited for the creation of hats, belts, bags and small fabric bowls etc. Lighter and softer than Vilene Decovil

Advantages:
Dimensionally stable
Resilient
Extremely tear resistant
Non-fraying
Resistant to bending

Method of use:

First iron the fabrics at length with steam to avoid any shrinkage later on. Allow the fabrics to dry completely. Place the interfacing with the coated side on the wrong side of the fabric. Then cover with a damp cloth and press the iron carefully for about 6 seconds, step by step each area; iron setting: wool.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Care: Washable up to 40 °C in the gentle cycle or dry cleanable

Colour: Beige,

Width 90 cm

Produced by: Vilene

Part Number: DECOVIL/LT

Ean Number: 4008983212249

 

2.65



Vlieseline Decovil Light Interfacing, 1m Pre Cut Pack

Vlieseline Decovil Light Interfacing, 1m Pre Cut Pack

Ref: 15197

In stock

Vlieseline Decovil Light Pre Cut Pack.Size 1m x 90cm.

A lighter alternative to standard Decovil. Ideal for creative applications or interior design. Resists tears and crease, and does not fray. Suitable for all fabrics. Machine washable at 30 degrees. Dry cleanable.

Produced by: Vlieseline

Part Number: 53603882

Ean Number: 4008983114444

 

13.60



Recently Viewed