1. Cotton Patch HomeHome
  2. LoginLogin
  3. Your Basket
    View Basket
  4. CheckoutCheckout

Vilene Fusible Fleece

Vilene Iron-on Volume Low Loft Fleece (per 1/4 metre)

Vilene Iron-on Volume Low Loft Fleece (per 1/4 metre)

Ref: 9844

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Iron-on volume fleece quilts, clothing, bags, soft pelmets and tiebacks.
Low loft – for a higher loft use Medium Loft.

Width is 90cm

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gentle cycle or dry cleanable

Equivalent to Pellon #987F Fusible Fleece

Part Number: H630 Special

 

1.77



Vilene Iron-on Fleece Medium Loft (per 1/4 metre)

Vilene Iron-on Fleece Medium Loft (per 1/4 metre)

Ref: 9841

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece

Iron-on volume fleece for quilts, clothing, bags, soft pelmets and tiebacks.
Medium loft – for a lower loft use Low Loft.

Width is 90cm

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gently cycle or dry cleanable

Equivalent to Pellon Fusible Thermolam Plus #TP971F

Part Number: H640

 

2.42



Recently Viewed