Lampshade Making Kits

Use your own fabrics to create your own lanterns with these easy to use DIY kits. Just add your own fabric or wallpaper and follow the instructions in the box, it's that easy.

The kit makes 4 mini drum latterns (15cm high) inside can be placed a battery powered LED Tea Light to light up the lantern. Four Tea Lights are included in the set. The lanterns use battery-powered flameless candles, and they will give your fabrics delightful decorative effects when lit.

How to make them
Easy to use, laminate your covering to the self adhesive lampshade panel and follow the step by step instructions to affix the two lampshade rings.

What size will my covering need to be?
Each covering needs to be 350mm wide x 150 mm to cover the self adhesive panel supplied

What's in the box
8 x metal rings
4 x Self adhesive panels
4 x PVC Base Disks
4 x PVC Disks for Lantern
4 x LED Tea Lights
1 x 3mtr roll self adhesive tape
4 x Tools for finishing

Use one of our fabrics to create a lampshade to match your upholstery, curtains, wallpaper or any room theme.

The kit makes a 20cm drum lampshade that can be used as a pendant (ceiling), or with a suitable table lamp. Simply add the fabric of your choice.

How to make them
Easy to use, laminate your covering to the self adhesive lampshade panel and follow the step by step instructions to affix the two lampshade rings.

What size will my covering need to be?
Your covering needs to be 645mm wide x 220 mm to cover the self adhesive panel supplied

What type of lamp holder will this lampshade fit
The lampshade frame included in your kit will fit the standard bayonet cap (BC) lamp holder.
This is the most common type of lamp fitting in the UK today. It can also be used with Edison Screw (E27) lamp holders, by removing the converter plug in the centre of the fitting

What's in the box
1 x Lampshade ring, epoxy coated
1 x Lampshade ring, epoxy coated with fitting
1 x Self adhesive lampshade panel size 643mm x 206mm includes 13mm kiss cut.
1 x 3mtr roll self adhesive tape
1 x Rolled Edge tool for finishing

Specifications
Your lampshade can be used in the UK and Europe.

Lampshade Assembled Size
20cm Diameter x 18cm High

Bulb Advice
The Manufacturers recommend the use of low energy bulbs with your lampshades. They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings.

Testing
The lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association.

Use one of our fabrics to create a lampshade to match your upholstery, curtains, wallpaper or any room theme.

The kit makes a 30cm drum lampshade that can be used as a pendant (ceiling), or with a suitable table lamp. Simply add the fabric of your choice.

How to make them
Easy to use, laminate your covering to the self adhesive lampshade panel and follow the step by step instructions to affix the two lampshade rings.

What size will my covering need to be?
Your covering needs to be 970mm wide x 255mm to cover the self adhesive panel supplied.

What type of lamp holder will this lampshade fit
The lampshade frame included in your kit will fit the standard bayonet cap (BC) lamp holder.
This is the most common type of lamp fitting in the UK today. It can also be used with Edison Screw (E27) lamp holders, by removing the converter plug in the centre of the fitting

What's in the box
1 x Lampshade ring, epoxy coated
1 x Lampshade ring, epoxy coated with fitting
1 x Self adhesive lampshade panel size 963mm x 238mm includes 14mm kiss cut.
1 x 3mtr roll self adhesive tape
1 x Rolled Edge tool for finishing

Specifications
Your lampshade can be used in the UK and Europe.

Lampshade Assembled Size
30cm Diameter x 21cm High

Bulb Advice
The Manufacturers recommend the use of low energy bulbs with your lampshades. They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings.

Testing
The lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association.

Use one of our fabrics to create a lampshade to match your upholstery, curtains, wallpaper or any room theme.

The kit makes a 40cm drum lampshade that can be used as a pendant (ceiling), or with a suitable table or floor standing lamp. Simply add the fabric of your choice.

How to make them
Easy to use, laminate your covering to the self adhesive lampshade panel and follow the step by step instructions to affix the two lampshade rings.

What size will my covering need to be?
Your covering needs to be 1282mm wide x 290mm to cover the self adhesive panel supplied.

What type of lamp holder will this lampshade fit
The lampshade frame included in your kit will fit the standard bayonet cap (BC) lamp holder.
This is the most common type of lamp fitting in the UK today. It can also be used with Edison Screw (E27) lamp holders, by removing the converter plug in the centre of the fitting

What's in the box
1 x Lampshade ring, epoxy coated
1 x Lampshade ring, epoxy coated with fitting
1 x Self adhesive lampshade panel 1276mm x 278mm includes 14mm Kiss cut
1 x 6mtr roll self adhesive tape
1 x Rolled Edge tool for finishing

Specifications
Your lampshade can be used in the UK and Europe.

Lampshade Assembled Size
40cm Diameter x 25cm High

Bulb Advice
The Manufacturers recommend the use of low energy bulbs with your lampshades. They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings.

Testing
The lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association.

Was £7.60 now down to £5.60

Create beautiful wall art with your fabrics and add a personalised touch to your living space.

A simple piece of fabric can be the perfect solution to an art-free space, it can be easily framed and hung on the wall with these easy to use kits, an excellent alternative to a costly painting or print.

About the kit
This kit makes you a 30cm circular piece of wall art using your fabric of choice.

About the product
This roll of lampshade vinyl is used for making or repairing a small number of hard backed lampshades.
The material is the most popular type of lampshade backing finished in White. Size: 1460mm x 500mm

How to use
Easy to use, remove the release paper and laminate your coverings to the self-adhesive side.
The release paper has a grid for easy cutting.


Maximum Lampshade Size (example)
You have enough material in this pack to repair or replace a lampshade
450mm Diameter x 500mm High

Features
Engineered for lampshade making
Fire resistance
Complies with BS EN 60598-1-2008, the British Standard for Luminaries
Passed the glow wire test carried out by the Lighting Association
Anti-static treated to minimise attraction of dust.
UV stabilised - Anti Yellowing
High impact strength
Exceptional tear resistance.
Reach Certificated
Manufactured in the UK

Specifications
Size: 1460mm x 500mm
Colour:White
Vinyl Thickness: 300micron