1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Square Patchwork Rulers

Show First 30 Product(s)

Square Patchwork Pieces

Below you can find a variety of patchwork templates, tools and shapes to make square patchwork pieces. some of the packs will contain more than just a square patchwork template.

Omnigrip 20 1/2

Omnigrip 20 1/2" Square Non-Slip Patchwork Ruler

Ref: 9033

In stock

Cutting, squaring and setting blocks on point is simple and easy with this invaluable, super-size tool. Working out the size of side and corner triangles when blocks are set on point is quite tricky, but these measurements are printed on the ruler itself - no more math required!

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN205

 

48.50



Omnigrip 16 1/2

Omnigrip 16 1/2" Square Non-Slip Patchwork Ruler

Ref: 11555

In stock

Right and let hand numbering & angle system. diagonal line for triangle cuts extra 1/2" on two sides for seam allowance.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN165

 

40.65



Omnigrid 15

Omnigrid 15" X 15" Rule

Ref: 125

In stock

The largest lapboard - square up your blocks with ease. Has a 45 degree angle running from corner to corner.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R15

 

25.95



Omnigrid 12.5

Omnigrid 12.5" X 12.5" Rule

Ref: 119

In stock

The most popular lapboard size - square up your blocks with ease. Has a 45 degree angle running from corner to corner.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R125

 

21.10



TrueCut 12.5
TrueCut Patchwork RulerUnique Guide SystemRectangular GuidesSafer to use with the TrueCut Ruler Guide SystemErgonomic rotary cutter has a unique handle design that aligns your wrist naturally.

TrueCut 12.5" x 12.5" Patchwork Ruler

Ref: 10536

In stock

The TrueCut patchwork rulers have a special track that interlocks with the cutter guide on the My Comfort range of rotary cutters. This allows for superior precision and accuracy! As you cut, the track and guide
keep the cutter from slipping away from the ruler’s edge.

• Works with the Cutter Guides to give you straight cuts every time
• Measured in 1/8 inch increments
• Labeled 1/4 and 3/4 inch marks for easy measurements
• Built-in spaces for marking your fabric directly through the ruler

Please note True Cut Rulers are not compatible with Omnigrid Ruler Grips (10302, 10303)

Produced by: TrueCut

Part Number: TC126SQ

 

19.95



Omnigrip 12.5

Omnigrip 12.5" x 12.5" Non-Slip Square Ruler

Ref: 8800

In stock

The "square master" - use to square up any finished block up to 12 1/2". The 1/2" seam allowance is included on two sides, making it perfect for cutting backgrounds to blocks. Also ideal for cutting wide borders, rectangles and custom-size squares.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN125

 

21.95



Omnigrip Square Non-Slip Patchwork Ruler Combo Pack
Omnigrip Square Non-Slip Patchwork Ruler Combo Pack - view 1Omnigrip Square Non-Slip Patchwork Ruler Combo Pack - view 2Omnigrip Square Non-Slip Patchwork Ruler Combo Pack - view 3Omnigrip Square Non-Slip Patchwork Ruler Combo Pack - view 4

Omnigrip Square Non-Slip Patchwork Ruler Combo Pack

Ref: 11556

In stock

The Omnigrip Square Combo Pack features the 6 1/2", 8 1/2" and 10 1/2" square rulers.

Each has extra 1/2" for seam allowance and diagonal angle lines. Use to cut, square up and trim patchwork blocks.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN65105S

 

35.75



Omnigrid 9 1/2

Omnigrid 9 1/2" X 9 1/2" Rule

Ref: 124

In stock

Square up your blocks with ease. Has a 45 degree angle running from corner to corner. Use for finished blocks of 9" and less.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R95

 

14.65



Omnigrip 8.5

Omnigrip 8.5" x 8.5" Non-Slip Patchwork Ruler

Ref: 9032

In stock

This ruler is handy for sub-cutting the 8 1/2in strips into squares. With the extra 1/2in, the seam allowance is built in for 8in finished squares. Also handy for squaring and trimming.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN85

 

15.45



Fiskars Folding 8
Fiskars Folding 8" Square / Triangle Patchwork Ruler  - view 1Fiskars Folding 8" Square / Triangle Patchwork Ruler  - view 2Fiskars Folding 8" Square / Triangle Patchwork Ruler  - view 3

Fiskars Folding 8" Square / Triangle Patchwork Ruler

Ref: 12816

In stock

A folding 8" patchwork ruler from Fiskars, perfect for classes.

Do more with a single ruler, thanks to a smart folding design that can be used open as a square or transformed into a triangle.

Square off corners and cut half-square triangles, rectangles or squares from 1" to 8" without fabric waste. This sturdy acrylic ruler folds in half for more options and features a built-in 1/4" seam allowance for easy measuring. A clear, durable hinge allows the ruler to lie perfectly flat for exact alignment. Markings feature clear intersections for enhanced visibility and can be read on light, dark and patterned fabrics.

Ideal for squaring off corners and cutting triangles and squares from 1" to 8"
8" x 8" ruler folds diagonally into a triangle for added versatility
1/4" seam allowance makes adding seams easy
Clear line intersections enhance visibility
Markings can be read on light, dark and patterned fabrics
Made of 3 mm-thick, premium-quality, clear acrylic for lasting durability

Produced by: Fiskars

Material: Acrylic

Part Number: 1023903

 

15.45



Omnigrid 6.5

Omnigrid 6.5" x 6.5" Rule with Grid

Ref: 7025

In stock

6 1/2" x 6 1/2" square ruler with 1/8" grid in contrasting yellow and black lines. Excellent for creating and checking half-square and quarter-square triangles miniatures, baby quilts and water color blocks.

Good visibility on light and dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R65G

 

10.55



Omnigrip 6.5

Omnigrip 6.5" x 6.5" Non-Slip Patchwork Ruler

Ref: 8803

In stock

The most popular size of small square - a must for every quilter. Foundation piecers love it for trimming seam allowances and squaring up blocks.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN65

 

11.40



TrueCut 6.5
TrueCut Patchwork RulerUnique Guide SystemRectangular GuidesSafer to use with the TrueCut Ruler Guide SystemErgonomic rotary cutter has a unique handle design that aligns your wrist naturally.

TrueCut 6.5" x 6.5" Patchwork Ruler

Ref: 10535

In stock

The TrueCut patchwork rulers have a special track that interlocks with the cutter guide on the My Comfort range of rotary cutters. This allows for superior precision and accuracy! As you cut, the track and guide
keep the cutter from slipping away from the ruler’s edge.

• Works with the Cutter Guides to give you straight cuts every time
• Measured in 1/8 inch increments
• Labeled 1/4 and 3/4 inch marks for easy measurements
• Built-in spaces for marking your fabric directly through the ruler

Please note True Cut Rulers are not compatible with Omnigrid Ruler Grips (10302, 10303)

Produced by: TrueCut

Part Number: TC65SQ

 

9.95



Omnigrid 6

Omnigrid 6" x 6" with Angles

Ref: 7287

In stock

6" x 6" square ruler + 1/8" grid with contrasting yellow and black lines for good visibility on light and dark fabrics. Heavy duty acrylic with a thickness that allows rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R6A

 

9.35



Omnigrip 5.5

Omnigrip 5.5" x 5.5" Non-Slip Patchwork Ruler

Ref: 9215

In stock

Use for cutting and squaring. Right and left hand numbering angle system. Diagonal line for triangle cuts. Extra 1/2in on two sides for seam allowance.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN55

 

11.40



Omnigrip 3.5

Omnigrip 3.5" x 3.5" Non-Slip Patchwork Ruler

Ref: 8804

In stock

The 1/2" seam allowances makes this ruler perfect for making 3" finished squares. Useful for cutting and trimming miniatures and a handy size for small sewing kits.

Omnigrip patchwork rulers are made from heavy duty acrylic. They have neon-coloured markings and slide easily across fabric. press down and the backing "grips" the fabrics so you can rotary-cut with confidence. Use right or left handed without flipping.

Produced by: Omnigrid

Part Number: RN35

 

6.90



Omnigrid 4 1/2

Omnigrid 4 1/2" X 4 1/2" Rule

Ref: 10204

In stock

Extra 1/2" for seam allowances for 4" blocks.

This 4 1/2in square ruler features a 1/8in grid. It is ideal for small drafting in detail miniature work cutting and squaring blocks 4 1/2in and less, for foundation piecing, quilt labels and more.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R45G

 

8.15



Omnigrid 4

Omnigrid 4" X 4" Rule

Ref: 127

In stock

A useful small ruler for cutting out small squares or evening up blocks on miniature quilts. Has a 1/8th inch grid for greater accuracy.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R4G

 

6.50



Omnigrid 2.5

Omnigrid 2.5" x 2.5" Mini Square with Grid

Ref: 7244

In stock

2 1/2" x 2 1/2" + 1/8" grid with contrasting yellow and black lines for good visibility on light and dark fabrics. Heavy duty acrylic with a thickness that allows rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R25G

 

4.05



Omnigrid 31.5cm x 31.5cm Lap Board

Omnigrid 31.5cm x 31.5cm Lap Board

Ref: 187

In stock

Metric Omnigrid Ruler

For cutting large squares or squaring up blocks and quilts. Metric markings with clear yellow and black enable the ruler to be used on a wide variety of fabrics.

SQUARING UP BLOCKS WITH THE OMNIGRID Lap Board
The following example will square a 30cm block. To square up the block, divide the block size in half (i.e. 15cm) and then locate the 15cm intersection on the Omnigrid ruler grid by finding the diagonal number.

Place the 15cm intersection at the centre of the block and then trim the strips off of two sides (call them A&B)

Rotate the remaining fabric a full turn and then align the 30cm grid marks on the corners of A&B (your 15cm diagonal will remain on the centre).

Now cut the strips off of the other two sides C&D= perfect 30cm square block

Produced by: Omnigrid

Part Number: R3131

 

21.30



Omnigrid 15 cm x 15cm Square with Grid

Omnigrid 15 cm x 15cm Square with Grid

Ref: 9900

In stock

Metric Omnigrid Ruler. Has a 7 1/2cm x 7 1/2cm grid in one corner.

Contrasting yellow and black lines allow the grid to be seen on light or dark fabrics. Heavy duty acrylic with a thickness that allows large rotary cutters to cut multiple layers of fabric at a time.

Produced by: Omnigrid

Part Number: R1515G

 

9.30



June Tailor 1/2
June Tailor 1/2" Shape Cut Slotter Ruler 12" x 12" - view 1June Tailor 1/2" Shape Cut Slotter Ruler 12" x 12" - view 2

June Tailor 1/2" Shape Cut Slotter Ruler 12" x 12"

Ref: 12942

In stock

Cut multiple quilting shapes in perfect 1/2” increments quickly and accurately.

{Details}
• Easy to use; simply place ruler on fabric and cut in desired slots.
• Use with your June Tailor® cutting mat and 45mm rotary cutter.
• Cut multiple strips in 1/2” increments.
• Turn Shape Cut™ after strips are cut to complete squares, triangles, diamonds, hexagons, bias strips and fringe.
• Large, gridded 12” x 12” size.
• Detailed instructions included with ruler.

{Video}

Produced by: June Tailor

Part Number: JT796

 

39.95



June Tailor Charming Shape Cut

June Tailor Charming Shape Cut

Ref: 13527

In stock

• The features of the Shape Cut™ slotted rulers in a "charming" small size.
• Ideal for working with pre-cut 2-1/2" strips and 5" squares.
• Convenient small size to keep handy by the sewing machine.

Use with a rotary cutter and mat, cut strips squares and triangles. Square up blocks 5" or smaller. Great for four-patch and rail fence blocks.

Produced by: June Tailor

Part Number: JT-1737

 

16.75



Marti Michell Templates - 3
Marti Michell Templates - 3" Square Basic. Set A - view 1Marti Michell Templates - 3" Square Basic. Set A - view 2Marti Michell Templates - 3" Square Basic. Set A - view 3

Marti Michell Templates - 3" Square Basic. Set A

Ref: 868

In stock

Laser cut acrylic templates designed to maximise speed and efficiency of cutting and piecing. Double-blunt corners allow perfect alignment. 7 squares and triangular pieces to make designs based on a 3" square. Makes 9", 12" or 15" blocks.

Produced by: Marti Michell

Part Number: 8251

 

16.60



Marti Michell Templates - 4
Marti Michell Templates - 4" Square Basic. Set B - view 1Marti Michell Templates - 4" Square Basic. Set B - view 2Marti Michell Templates - 4" Square Basic. Set B - view 3

Marti Michell Templates - 4" Square Basic. Set B

Ref: 870

In stock

Laser cut acrylic templates designed to maximise speed and efficiency of cutting and piecing. Double-blunt corners allow perfect alignment. 7 squares and triangular pieces to make designs based on a 4" square. Makes 12" or 16" blocks.

Produced by: Marti Michell

Part Number: 8252

 

20.10



Marti Michell Templates - 3

Marti Michell Templates - 3" Square Bonus. Set C

Ref: 869

In stock

Seven templates that work with Set A (ref 868). Isoceles triangles, other triangles, kite and the attic window shapes - do even more dynamic blocks. See Marti Michell's Book 2 (Ref 3083) for 81 designs using this set.

Produced by: Marti Michell

Part Number: 8253

 

20.95



Marti Michell Templates - 45 Diamond Basic. Set E

Marti Michell Templates - 45° Diamond Basic. Set E

Ref: 872

In stock

Seven templates based on a 45 degree diamond plus extra shapes. All laser cut acrylic templates to ensure accuracy. Double-blunt corners ensure perfect alignment. For designs using this set refer to Marti's book Volume 3 - Ref 3084.

Produced by: Marti Michell

Part Number: 8255

 

22.75



Marti Michell 12

Marti Michell 12" 7-Patch Set L

Ref: 897

In stock

6 pieces for cutting 8 shapes with seam allowances. Make dozens of popular seven-patch designs (like those shown right) without doing any maths - just rotary cut and sew!

Produced by: Marti Michell

Part Number: 8954

 

20.15



Marti Michell Set T 5

Marti Michell Set T 5" Square Basic Shapes

Ref: 10622

In stock

Bigger pieces are perfect for beginners -- and today's large fabric prints!

3 templates for cutting 7 shapes, including the finished 5? combination of square, half-square triangle and quarter-square triangle — a design trio used in hundreds of block designs. Plus 4 bonus shapes.

Make 5" units for 10" blocks in the four-patch family and 15" blocks in the nine patch family. Use with Sets Q
and R for even more variety of block designs. Enclosed 24-page booklet includes conversion chart for block designs in The Encyclopedia of Patchwork Blocks, Volumes 1 and 2, below.

Quarter-inch seam allowances included. Engineered corners with laser-cut accuracy.

Produced by: Marti Michell

Part Number: 8203

 

20.15



Marti Michell Q is for Quilting. Set Q

Marti Michell Q is for Quilting. Set Q

Ref: 10472

In stock

Many popular patchwork designs require just a square, its compatible half-square triangle and companion quarter-square triangle. In the Perfect Patchwork Template System, we have many popular sizes of those three shapes: 1", 1 1/2", 2", 3", 4" and more. The only common size square that was missing was a 2 1/2" square ~ the perfect size for a basic template set and a how-to-use-templates booklet.

The "template primer" booklet includes loads of blocks, tips for combining blocks and simple quilt designs. With just three pieces, we walk and sew quilters t hrough dozens of blocks, from 5" to 20".

Set Q has been updated to include 7 pieces. Use Set Q to make 2 1/2" finished units for dozens of block designs.

Produced by: Marti Michell

Part Number: 8212

 

16.65



Multi Size Fussy Cutter, Marti Michell
Multi Size Fussy Cutter, Marti Michell - view 1Multi Size Fussy Cutter, Marti Michell - view 2

Multi Size Fussy Cutter, Marti Michell

Ref: 13600

In stock

Today’s quilters have such wonderful fabric choices. It is so much fun to fussy cut and emphasize motifs that help tell the story or create a new design. The detailed lines in a regular ruler can be confusing. Besides you have to “do the math” to know where the center is or trust your “eyeball” measurements. You may not know when you will need it, but it is easy to see that the Fussy Cutter is “too handy not to have it on hand.”

All sizes are numbered for left or right handed use and marked with: • Center dot • Two 45° diagonal lines • Lines for cut size and 1/4-inch seam allowances.

5 Squares, 1", 2", 3", 4" and 5".

Produced by: Marti Michell

Part Number: 8297

 

11.40



Sew Easy Patchwork Square 4.5
Sew Easy Patchwork Square 4.5" - view 1

Sew Easy Patchwork Square 4.5"

Ref: 13368

In stock

Small Patchwork Square Ruler from Sew Easy. 4.5" square. Extra small square for marking and rotary cutting blocks for miniature quilts and small patchwork projects.

Produced by: Sew Easy

Part Number: NL4176

 

5.58



EZ Quilting Dear Jane Wedge and Square

EZ Quilting Dear Jane Wedge and Square

Ref: 12842

Includes Dear Jane triangle & square tools. Each tool has an easy to read, big number design & built in 1/4in seam allowance.

Designed for helping to recreate the Dear Jane quilt as seen in the book Dear Jane by Brenda Papadakis and the lovingly recreated 225 patterns from the Jane A. Stickle's quilt.

Triangles:
Cut triangle shapes quickly from 8.5" strips
Cut different size triangles up to 8"

Square:
Cut different squares up to 4"
Cut 45 degree triangles in 2 sizes
Use tool to square up finished blocks

Produced by: EZ Quilting

Part Number: 8823760A

 

17.25



Clover Patchwork Templates - Square/Octagon

Clover Patchwork Templates - Square/Octagon

Ref: 7119

In stock

Seven templates - squares (2), octagon, diamonds (2) and triangles (2) made of 1/4" plastic for "English Patchwork". Inside and outside of the 1/4" plastic gives you the cutting line for your template and fabric.

The inside measurement of the large square is 3.25"

Produced by: Clover

 

5.60



Sizzix Square Patchwork Dies

The patchwork dies below use a Sizzix machine such as a Big Shot Plus to cut out accurate patchwork pieces time after time.

Sizzix Bigz Die - Square, 4
Sizzix Bigz Die - Square, 4" Finished (4 1/2" Unfinished) - view 1Sizzix Bigz Die - Square, 4" Finished (4 1/2" Unfinished) - view 2Sizzix Bigz Die - Square, 4" Finished (4 1/2" Unfinished) - view 3

Sizzix Bigz Die - Square, 4" Finished (4 1/2" Unfinished)

Ref: 10627

RRP £14.99 our price £12.95

Save time cutting out your patchwork pieces with this Sizzix Bigz Die. The Die cuts a 4 1/2" square of fabric allowing a 1/4" seam on all sides to leave you with a 4" pieced square. This die is designed for use with the Big Shot (all models) but can also be used in the Big Shot Pro, BIGkick and Vagabond machines from Sizzix.

The Bigz Die works with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that five layers of fabric can be cut at one time with no problems. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape.)

As well as cutting fabric Bigz Clear dies are designed for paper crafts and can transform treasured photographs and computer printouts (as well as a variety of other materials, including chipboard, foam, magnet and metallic foil) into exciting decorative accents, frames, tags and other spectacular shapes that clearly capture any style.

Produced by: Sizzix

Material: Steel Rule Dies: ABS Plastic, CARB Compliant Wood, Steel Rule Blade, Long Lasting Ejection Foam

Part Number: 657609

 

12.95



Sizzix Bigz Die - Square, 2
Sizzix Bigz Die - Square, 2" Finished (2 1/2" Unfinished) - view 1Sizzix Bigz Die - Square, 2" Finished (2 1/2" Unfinished) - view 2Sizzix Bigz Die - Square, 2" Finished (2 1/2" Unfinished) - view 3

Sizzix Bigz Die - Square, 2" Finished (2 1/2" Unfinished)

Ref: 10628

In stock

RRP £14.99 our price £12.95

Save time cutting out your patchwork pieces with this Sizzix Bigz Die. The Die cuts a 2 1/2" square of fabric allowing a 1/4" seam on all sides to leave you with a 2" pieced square. This die is designed for use with the Big Shot (all models) but can also be used in the Big Shot Pro, BIGkick and Vagabond machines from Sizzix.

The Bigz Die works with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that five layers of fabric can be cut at one time with no problems. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape.)

As well as cutting fabric Bigz Clear dies are designed for paper crafts and can transform treasured photographs and computer printouts (as well as a variety of other materials, including chipboard, foam, magnet and metallic foil) into exciting decorative accents, frames, tags and other spectacular shapes that clearly capture any style.

Produced by: Sizzix

Material: Steel Rule Dies: ABS Plastic, CARB Compliant Wood, Steel Rule Blade, Long Lasting Ejection Foam

Part Number: 657607

 

12.95



Sizzix Bigz L Die - Square, 4 1/2
Sizzix Bigz L Die - Square, 4 1/2" Finished (5" Unfinished) - view 1Sizzix Bigz L Die - Square, 4 1/2" Finished (5" Unfinished) - view 2Sizzix Bigz L Die - Square, 4 1/2" Finished (5" Unfinished) - view 3

Sizzix Bigz L Die - Square, 4 1/2" Finished (5" Unfinished)

Ref: 10858

Save time cutting out your patchwork pieces with this Sizzix Bigz L Die. The Die cuts a 5" square of fabric allowing a 1/4" seam on all sides to leave you with a 4 1/2" pieced square. This die is designed for use with the Big Shot (all models) but can also be used in the Big Shot Pro, BIGkick and Vagabond machines from Sizzix.

The Bigz L Die works with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that five layers of fabric can be cut at one time with no problems. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape.)

As well as cutting fabric Bigz Clear dies are designed for paper crafts and can transform treasured photographs and computer printouts (as well as a variety of other materials, including chipboard, foam, magnet and metallic foil) into exciting decorative accents, frames, tags and other spectacular shapes that clearly capture any style.

Produced by: Sizzix

Material: Steel Rule Dies: ABS Plastic, CARB Compliant Wood, Steel Rule Blade, Long Lasting Ejection Foam

Part Number: 657626

 

32.50



Sizzix Bigz Die - Honeycombs & Squares
Sizzix Bigz Die - Honeycombs & Squares - view 1Sizzix Bigz Die - Honeycombs & Squares - view 2Sizzix Bigz Die - Honeycombs & Squares - view 3Sizzix Bigz Die - Honeycombs & Squares - view 4

Sizzix Bigz Die - Honeycombs & Squares

Ref: 11689

In stock

RRP £14.99 our price £12.95

Cuts 4 shapes, one large honeycomb, one small honeycomb, one large square and one small square. Shapes can be combined in various combinations to make a variety of designs. Small shapes can be used to cut out plastic templates to assist in piecing. This die is designed for use with the Big Shot and Big Shot Plus but can also be used in the Big Shot Pro, BIGkick and Vagabond machines from Sizzix.

The Bigz Die works with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that five layers of fabric can be cut at one time with no problems. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape.)

As well as cutting fabric Bigz Clear dies are designed for paper crafts and can transform treasured photographs and computer printouts (as well as a variety of other materials, including chipboard, foam, magnet and metallic foil) into exciting decorative accents, frames, tags and other spectacular shapes that clearly capture any style.

Produced by: Sizzix

Material: Steel Rule Dies: ABS Plastic, CARB Compliant Wood, Steel Rule Blade, Long Lasting Ejection Foam

Part Number: 660917

 

12.95



Sizzix Bigz Plus Q Die, Diamond Point
Sizzix Bigz Plus Q Die, Diamond Point - view 1Sizzix Bigz Plus Q Die, Diamond Point - view 2Sizzix Bigz Plus Q Die, Diamond Point - view 3Sizzix Bigz Plus Q Die, Diamond Point - view 4

Sizzix Bigz Plus Q Die, Diamond Point

Ref: 13253

In stock

RRP £34.98 our price £31.50

The Diamond Point block creates a dynamic design with lots of movement, or use just the diamonds for a one-patch quilt.

Save time cutting out your pieces with this Sizzix Bigz Plus Die. Cuts 4 patches that make a 12" block when assembled. Designed by Victoria Findlay Wolfe.

This die is designed for use with the Big Shot Plus but can also be used in the Big Shot Pro from Sizzix.

The Bigz Die works with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that five layers of fabric can be cut at one time with no problems. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape.)

As well as cutting fabric Bigz Clear dies are designed for paper crafts and can transform treasured photographs and computer printouts (as well as a variety of other materials, including chipboard, foam, magnet and metallic foil) into exciting decorative accents, frames, tags and other spectacular shapes that clearly capture any style.

Designed by: Victoria Findlay Wolfe

Produced by: Sizzix

Material: Steel Rule Dies: ABS Plastic, CARB Compliant Wood, Steel Rule Blade, Long Lasting Ejection Foam

Part Number: 662028

 

31.50



Gemini Square Patchwork Dies

The patchwork dies below use the Gemini machine from Crafter's Companion to cut out accurate patchwork pieces time after time.

Gemini Build-a-Block Patchwork System
Gemini Build-a-Block Patchwork System - view 1Gemini Build-a-Block Patchwork System - view 2Gemini Build-a-Block Patchwork System - view 3Gemini Build-a-Block Patchwork System - view 4Gemini Build-a-Block Patchwork System - view 5Gemini Build-a-Block Patchwork System - view 6

Gemini Build-a-Block Patchwork System

Ref: 13493

In stock

Save time cutting out your patchwork squares with this Gemini Build-a-Block Patchwork System and the Gemini Die Cutting Machine. (available separately).

Build-A-Block is an all-in-one patchwork system that enables you to create a variety of traditional blocks in different sizes – 3", 4", 6", 8", 9" and 12" blocks. All the dies include a 1/4" seam allowance for accuracy.

{Video}


{Details}This 18 piece set allows you to work creatively with your fabrics rather than be restricted by only owning a few dies.

Build-A-Block is a boxed set comprising three trays that hold the following dies:

Squares: 1.5", 2", 2.5", 3.5", 4.5" and 6.5"
Half Square Triangles: 1.5", 2", 2.5", 3.5", 4.5" and 6.5"
Quarter Square Triangles: 1.5", 2", 2.5", 3.5", 4.5" and 6.5"

The dies in the Build-A-Block are neatly stored by shape in three trays in an attractive box. The set also includes a Block Pattern Guide that contains 20 block designs with information on block sizes and what dies to use to make the blocks.

If you think you are going to breeze through those in no time at all then an additional 60 block designs are also available online.
{Media}
The Gemini Multi Build a Block Dies work with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that eight layers of fabric can be cut at one time. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape). Dies are not compatible with the Sizzix Big Shots.

As well as cutting fabric Gemini Multi Media dies are designed for paper crafts, cork, foam, felt and metallic foil. For a full list see the Gemini Machine details.

Produced by: Crafter's Companion

Material: 1.5mm deep cast metal dies

Part Number: GEM-MD-MM-BAB

 

99.95



Gemini Nesting Squares Patchwork Dies
Gemini Nesting Squares Patchwork Dies  - view 1Gemini Nesting Squares Patchwork Dies  - view 2Gemini Nesting Squares Patchwork Dies  - view 3

Gemini Nesting Squares Patchwork Dies

Ref: 13500

In stock

Save time cutting out your patchwork squares with this Gemini Patchwork Die Set and the Gemini Die Cutting Machine.

The pack includes seven dies that can cut 5”, 4.5”, 4”, 3.5”, 3”, 2.5” and 2” squares.

The Gemini Multi Media Patchwork Nesting Squares Dies work with everything from batik and cotton to batting and denim. For standard patchwork weight cotton fabrics we have found that eight layers of fabric can be cut at one time. (Quantity of layers to cut determined by thickness, fabric and intricacy of shape). Dies are not compatible with the Sizzix Big Shots.

As well as cutting fabric Gemini Multi Media dies are designed for paper crafts, cork, foam, felt and metallic foil. For a full list see the Gemini Machine details.

Produced by: Crafter's Companion

Material: 1.5mm deep cast metal dies

Part Number: GEM-MD-MM-NEST1

 

24.95



Double Patchwork Ruler Grip by Omnigrid

Double Patchwork Ruler Grip by Omnigrid

Ref: 10302

In stock

Double Suction Cups for patchwork rulers. Provides a steady grip on your ruler and keeps fingers away from rotary blade when cutting. *Works on clean, smooth surface rulers or templates * Attaches in seconds *Easy to use!

Instructions:
1. Flip up both black levers to release suction cups. 2. Place Ruler Grip against surface. 3. Gently press down on Grip while flipping down both levers. 4. Position ruler or template for cutting and press down on Grip to keep ruler in place. To remove Ruler Grip, flip up both levers and slide finger under suction cups to break the seal.

Please note: Not suitable for use with the TrueCut range of patchwork rulers.

Produced by: Omnigrid

Part Number: 2229

 

13.50



Glow-Line Tape

Glow-Line Tape

Ref: 8785

In stock

Glow-Line, a transparent, fluorescent tape for highlighting lines and shapes on rulers.

Apply Glow-Line to the underside of a ruler to highlight measurements or shapes. Saves time and avoids errors when cutting multiples of the same shape.

Glow-Line is low tack - it will not leave residue on your ruler. Three rolls per pack - pink orange and yellow. Each roll has 7 yards of ¼" wide tape.

Produced by: Omnigrid

Part Number: 610600

 

3.75



TrueGrips Ruler Adhesive Rings from TrueCut

TrueGrips Ruler Adhesive Rings from TrueCut

Ref: 10534

In stock

For straight, accurate cuts, you need to keep your ruler from slipping. TrueGrips help you by adding a completely nonskid surface to any ruler. 15 grips per pack.

The TrueGrips can be simply attached to any ruler helping to prevent your ruler slippling, increasing safety and accuracy. Transparent for easy fabric visibility.

Produced by: TrueCut

Part Number: TCGRIP

 

4.95



Invisi-Grip Roll from Omnigrid 12 1/2

Invisi-Grip Roll from Omnigrid 12 1/2" x 1 yard

Ref: 8526

In stock

Invisigrip is a clear non-slip material that is applied to the underside of rulers and templates. It is easy to apply and does not obscure the markings. When you want to apply pressure it prevents rulers from slipping but slides easily when no pressure is applied.

Produced by: Omnigrid

Part Number: 2101

 

6.35



Fabric Grips

Fabric Grips

Ref: 437

In stock

A fabric grip on the corners of some patchwork rulers and templates will help prevent slipping when marking or using rotary cutters. Prevents templates and rulers slipping. 36 per pack.

Produced by: Collins

Part Number: 18C

 

4.10



Show First 30 Product(s)

Recently Viewed