1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Steam A Seam 2 Range

Steam A Seam 2

Below you can find our selection of Steam A Seam 2 products from the Warm Company. A double stcik fusible web, available in normal and lite, pre packed and by the metre.

Steam A Seam 2 (per 1/4 metre)

Steam A Seam 2 (per 1/4 metre)

Ref: 511

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

12" wide

Steam-A-Seam 2 has the pressure sensitive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5540

 

1.37



Steam a Seam Lite 2 - 5 Sheets 9

Steam a Seam Lite 2 - 5 Sheets 9" x 12"

Ref: 8672

In stock

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Ideal for Sheer, lightweight fabric
•Large appliques will not bubble
•Create soft appliques for quilts and clothing - no sewing required
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.

5 Sheets 9" x 12"

Lite Steam-A-Seam 2 is the incomparable new lightweight fusible web from the Warm Company.

Like the original, Lite Steam-A-Seam 2 has a pressure sensitive adhesive that allows for a temporary hold to your materials. There is no pressing until your entire appliqué is in place. The lite Steam-A-Seam is 1/2 the weight of the regular versions.

You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5417

 

5.95



Steam A Seam 2 - 5 Sheets 8

Steam A Seam 2 - 5 Sheets 8" x 12"

Ref: 7106

In stock

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

5 Sheets 9" x 12"

Steam-A-Seam 2 has the pressure sensitive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5517

 

5.95



Steam A Seam 2 Fusible Tape - 1/4

Steam A Seam 2 Fusible Tape - 1/4" x 40 yds

Ref: 8190

In stock

Was £5.75 now down to £4.88. Save 15%

•Make your own fusible bias tape
•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

1/4" x 40 yards (6.35mm x 36.58 metres)

Steam-A-Seam 2 has the pressure sensitive adhesive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5509

 

4.88



Recently Viewed