1. Cotton Patch Blog Blog
  2. Cotton Patch HomeHome
  3. LoginLogin
  4. Your Basket
    View Basket
  5. CheckoutCheckout

Fusibles

HeatnBond Feather Lite (per 1/4 metre)

HeatnBond Feather Lite (per 1/4 metre)

Ref: 10426

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

HeatnBond Feather Lite is a light weight iron-on adhesive that creates a strong bond without adding extra weight or stiffness. Designs can be drawn, traced or printed and then easily cut out. Once applied it is easy to sew through. Ideal for multi-layer appliques, quilting, wearables etc. 43cm wide.

Specifically formulated for use with light to medium weight fabrics

Ideal for appliques, quilts and other sewable lightweight craft projects.

Eliminates pinning.

Once applied, it can be easily sewn through.

May be safely machine washed after edges have been sewn or sealed.

Needles won't gum up.

Available by the metre. Minimum order quantity is a metre.

Produced by: Thermo o web

Part Number: 3531

 

0.69



HeatnBond Lite (per 1/4 metre)

HeatnBond Lite (per 1/4 metre)

Ref: 775

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

For fine/lightweight fabrics. 43cm wide. Sewable.

This heat activated adhesive has the strongest bonding power of any lightwieght adhesive you can buy without adding extra weight or stiffness.

Specifically formulated for use with light to medium weight fabrics

Produced by: Thermo o web

Part Number: 3521

 

0.69



HeatnBond Ultra (per 1/4 metre)

HeatnBond Ultra (per 1/4 metre)

Ref: 774

In stock

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

A very strong, paper-backed, iron-on adhesive designed for clothing, craft and home dec project where sewing is not required after fusing (it can gum up the needle).

43cm wide.

Machine washable. Warm or cool wash.

Produced by: Thermo o web

Part Number: 3501

 

0.71



HeatnBond Ultra Tape Roll 7/8

HeatnBond Ultra Tape Roll 7/8" x 10 yds

Ref: 10106

In stock

This iron-on adhesive is the crafters choice over traditional fusible webs. It has a no-sew bond that is 3 times stronger than other webs. Adhesive can be used with a wide range of materials such as fabric, foil, lame, felt , suede, cardboard, leather and wood.

•Fusible adhesive is 7/8" x 10 yards.
•Perfect for craft and home decorating projects.
•Has a low temperature/short pressing time.
•Edges do not need to be sealed.
•HeatnBond UltraHold is an outstanding no-sew heat activated adhesive
•Materials won't lift or pucker.
•Materials can be machine washed.

Produced by: Thermo o web

Part Number: L33509/78

 

3.00



HeatnBond Ultra Tape Roll 5/8

HeatnBond Ultra Tape Roll 5/8" x 10 yds

Ref: 12870

In stock

This iron-on adhesive is the crafters choice over traditional fusible webs. It has a no-sew bond that is 3 times stronger than other webs. Adhesive can be used with a wide range of materials such as fabric, foil, lame, felt , suede, cardboard, leather and wood.

•Fusible adhesive is 5/8" x 10 yards.
•Perfect for craft and home decorating projects.
•Has a low temperature/short pressing time.
•Edges do not need to be sealed.
•HeatnBond UltraHold is an outstanding no-sew heat activated adhesive
•Materials won't lift or pucker.
•Materials can be machine washed.

Produced by: Thermo o web

Part Number: 3509/58

 

3.00



HeatnBond Ultra Tape Roll 3/8

HeatnBond Ultra Tape Roll 3/8" x 10 yds

Ref: 12869

In stock

This iron-on adhesive is the crafters choice over traditional fusible webs. It has a no-sew bond that is 3 times stronger than other webs. Adhesive can be used with a wide range of materials such as fabric, foil, lame, felt , suede, cardboard, leather and wood.

•Fusible adhesive is 3/8" x 10 yards.
•Perfect for craft and home decorating projects.
•Has a low temperature/short pressing time.
•Edges do not need to be sealed.
•HeatnBond UltraHold is an outstanding no-sew heat activated adhesive
•Materials won't lift or pucker.
•Materials can be machine washed.

Produced by: Thermo o web

Part Number: 3509/38

 

3.00



HeatnBond Lite Tape Roll 7/8

HeatnBond Lite Tape Roll 7/8" x 10 yds

Ref: 13285

In stock

HeatnBond® Lite is a roll of iron-on, sewable, double-sided adhesive for bonding fabric without extra weight or stiffness. Use it in place of pinning or basting and just stitch right through the adhered layers of fabric.

7/8 in x 10 yards (22 mm x 9.1 m)
•Heat activated
•Permanent
•Double-sided adhesive
•For use on fabric
•Doesn’t gum up needles!

Produced by: Thermo o web

Part Number: 3348

 

2.70



HeatnBond Lite Tape Roll 5/8

HeatnBond Lite Tape Roll 5/8" x 10 yds

Ref: 12866

In stock

HeatnBond® Lite is a roll of iron-on, sewable, double-sided adhesive for bonding fabric without extra weight or stiffness. Use it in place of pinning or basting and just stitch right through the adhered layers of fabric.

•5/8 in x 10 yards (16 mm x 9.1 m)
•Heat activated
•Permanent
•Double-sided adhesive
•For use on fabric
•Doesn’t gum up needles!

Produced by: Thermo o web

Part Number: 3347

 

2.70



HeatnBond EZ Print Lite 10 sheets 8.5

HeatnBond EZ Print Lite 10 sheets 8.5" x 11"

Ref: 12868

In stock

HeatnBond EZ Print Lite is a paper backed, iron-on, sewable, double-sided adhesive for bonding fabric without extra weight or stiffness. Use it in place of pinning or basting for appliqué shapes on quilts, wall hangings and attire. Print directly on the paper backing to easily design appliqué pieces!

•8.5 in x 11 in (22 cm x 28 cm)
•10 sheets per pack
•Heat activated permanent double-sided adhesive
•EZ to print
•EZ to trace
•EZ to sew through
•Solid sheet of adhesive on a paper backing
•For use on fabrics
•Doesn’t gum up needles
•Eliminates pinning!

Use
•Pre-wash all materials (without fabric softener) you will be using prior to fusing. Pre-test adhesive on materials prior to fusing.
•Do not touch iron directly to the adhesive sheet. Do not iron directly to your ironing board.
•Item must be sewn or otherwise attached before washing. Machine wash cold and dry on low heat or no heat (and in accordance to garment / fabric washing directions). Avoid repeated or excessive ironing to the area after fusing.
•EZ Sheets can be run thru an INKJET printer (NOT a laser jet or copy machine). Feed EZ Sheet into printer to print on the paper side, set printer to Draft or Transparency setting, allow to dry before touching. Run any lettering in mirror setting so they are the correct orientation when cut from the fabric.

Produced by: Thermo o web

Part Number: 3358

 

8.95



Bondaweb (per 1/4 metre)

Bondaweb (per 1/4 metre)

Ref: 735

In stock

Bondaweb® from Vilene is a web adhesive on paper. The paper supports the web while drawing as well as ironing. With Bondaweb®, different materials and fabrics can be fused together by ironing, very easily. Bondaweb® is ideal for fancy appliqués and textile handicrafts in all forms and colours as well as for repairs. With Bondaweb® you can let your creative streak run wild!

Please note Vilene is also branded as Vlieseline

The price shown for this Bondaweb is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Double-sided adhesive to bond fabrics together simply by ironing. 44cm (17") wide.

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Create your own individual design, PAINT the adhesive side of Bondaweb® with acrylic paint, and then let it dry well. Place the adhesive side of Bondaweb® on the right side of the fabric and iron it on from the paper side. Afterwards let everything cool down well. Carefully pull off the base paper of Bondaweb®. Note, the painted side always has to be covered with baking paper if it is to be re-ironed afterwards.

Also called Wonder Under and Vliesofix

You can purchase Bondaweb in a variety of sizes. See all our Vilene Bondaweb here.

Produced by: Vilene

Part Number: 2V329

 

0.91



Bondaweb by the Roll (30 metres)

Bondaweb by the Roll (30 metres)

Ref: 9387

Bondaweb by the Roll and save £7.50!.

Double-sided adhesive to bond fabrics together simply by ironing. 16" (44cm) wide x 30m.

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Also called Wonder Under

Produced by: Vilene

Part Number: 2V329

 

89.95

Related products:

  1. Bondaweb (per 1/4 metre)
    0.91 (Ref: 735)



Bondaweb by the Roll (5 metres)

Bondaweb by the Roll (5 metres)

Ref: 13778

In stock

30cm wide and 5m long roll of Bondaweb from Vilene. Please note that this is 30cm and therefore shorter than the Bondaweb we sell by the metre or by 30m roll which is is 44cm wide.

Double-sided adhesive to bond fabrics together simply by ironing.

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Also called Wonder Under

Produced by: Vilene

Part Number: V330

 

19.75

Related products:

  1. Bondaweb (per 1/4 metre)
    0.91 (Ref: 735)



Bondaweb Pack

Bondaweb Pack

Ref: 13802

In stock

120cm x 175mm pack of Bondaweb from Vilene.

Double-sided adhesive to bond fabrics together simply by ironing.

Suitable for almost all fabrics, raffia, cardboard and, at lower temperatures, also for leather.

Washable in temperatures up to 60C or dry cleanable.

Produced by: Vilene

Part Number: V902

 

2.45

Related products:

  1. Bondaweb (per 1/4 metre)
    0.91 (Ref: 735)



Steam A Seam 2 (per 1/4 metre)

Steam A Seam 2 (per 1/4 metre)

Ref: 511

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

12" wide

Steam-A-Seam 2 has the pressure sensitive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5540

 

1.37



Steam a Seam Lite 2 - 5 Sheets 9

Steam a Seam Lite 2 - 5 Sheets 9" x 12"

Ref: 8672

In stock

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Ideal for Sheer, lightweight fabric
•Large appliques will not bubble
•Create soft appliques for quilts and clothing - no sewing required
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.

5 Sheets 9" x 12"

Lite Steam-A-Seam 2 is the incomparable new lightweight fusible web from the Warm Company.

Like the original, Lite Steam-A-Seam 2 has a pressure sensitive adhesive that allows for a temporary hold to your materials. There is no pressing until your entire appliqué is in place. The lite Steam-A-Seam is 1/2 the weight of the regular versions.

You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5417

 

5.95



Steam A Seam 2 - 5 Sheets 8

Steam A Seam 2 - 5 Sheets 8" x 12"

Ref: 7106

In stock

•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

5 Sheets 9" x 12"

Steam-A-Seam 2 has the pressure sensitive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5517

 

5.95



Steam A Seam 2 Fusible Tape - 1/4

Steam A Seam 2 Fusible Tape - 1/4" x 40 yds

Ref: 8190

In stock

Was £5.75 now down to £4.88. Save 15%

•Make your own fusible bias tape
•Double sided temporary stick adhesive.
•Bond permanently when ironed.
•Sewing is not required but is OK. Sew without gumming needle.
•Fuse fabric, lace, ribbon, paper and more.
•Machine wash and dry or dry-clean. DO NOT USE FABRIC SOFTENER.
•Unfinished edges won't lift or fray.

1/4" x 40 yards (6.35mm x 36.58 metres)

Steam-A-Seam 2 has the pressure sensitive adhesive on both sides which allows for a temporary hold to both the appliqué material and the background material. You can hold your project vertically and the appliqué pieces stay in place and are still repositionable until fused with an iron. Before fusing, tack your project to a wall or try on a garment to check appliqué placement.
Once fused the bond is permanent.

We recommend pre-washing all fabrics before fusing. This will help remove any finishes that might prevent the adhesive from penetrating the fabric. Also, this should take out any shrinkage from your fabric. Do not use fabric softeners or dryer sheets.
Always pre-test any fusibles to insure that your fabric is compatible. Be sure to check that the iron temperature is compatible with the type of fabric you are using

Produced by: The Warm Company

Part Number: 5509

 

4.88



Pellon EZ Steam II (per 1/4 metre)

Pellon EZ Steam II (per 1/4 metre)

Ref: 11242

Pellon EZ Steam II is 12" wide. Two sided pressure sensitive fusible web. Use with fabric, paper, wadding, lace, cardboard and wood. Great for applique, hems, collars, mixed media arts and trims. No sewing required, bonds permanently after fusing with iron.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Pellon® EZ-Steam® II is a double-sided, pressure sensitive fusible with a paper backing. The two adhesive sides temporarily stick to both the background and applique fabrics. It aids in the placement of the fusible web and gives you the versatility of moving the applique into another position until you have permanently fused the fabric.

Produced by: Pellon

Part Number: EZ2D25R

 

1.50



Marti's Choice Fusible Batting (Wadding) Tape 1

Marti's Choice Fusible Batting (Wadding) Tape 1" x 30yds x 2 Rolls

Ref: 10624

In stock

1 inch wide, 30 yards long, 2 rolls per package. Single Sided Fusible

Marti's Choice Batting Tape won't gum up machine needles and is soft enough to needle easily by hand. Use it to stabilize seams and bias edges, and for low-fat machined quilting in sections! It's PERFECT for low-fat machine quilting in sections -- when you divide the wadding, use Marti's Choice Batting Tape to fuse the wadding together again!

Tips booklet includes Marti's Famous "Low Fat" method introduced in her Maching Quilting in Sections book and a no-binding finish for table runners. Details are included in the tips booklet that's packaged with the tape.

Produced by: Marti Michell

Material: Polyester

Part Number: 8220

 

8.75



Marti's Choice Fusible Batting (Wadding) Tape 2

Marti's Choice Fusible Batting (Wadding) Tape 2" x 30yds

Ref: 10625

In stock

2 inch wide, 30 yards long, 1 roll per package. Single Sided Fusible

Marti's Choice Batting Tape won't gum up machine needles and is soft enough to needle easily by hand. Use it to stabilize seams and bias edges, and for low-fat machined quilting in sections! It's PERFECT for low-fat machine quilting in sections -- when you divide the wadding, use Marti's Choice Batting Tape to fuse the wadding together again!

Tips booklet includes Marti's Famous "Low Fat" method introduced in her Maching Quilting in Sections book and a no-binding finish for table runners. Details are included in the tips booklet that's packaged with the tape.

Produced by: Marti Michell

Material: Polyester

Part Number: 8221

 

8.75



Quilter's 1/4

Quilter's 1/4" Marking Tape (30yds)

Ref: 431

In stock

Single Faced Tape 1/4" tape for marking quilting seam with a Light Adhesive. No Residue left on your fabric

Use for grids, parallel lines and cross hatching.

Produced by: Sew Easy

Part Number: ER394

 

1.95



Vilene Wundaweb

Vilene Wundaweb

Ref: 8562

In stock

20mm x 5m tape. Bonds fabrics together for a no-sew hem.

Permanent Hems the Professional Way

Wundaweb Fusing Instructions.

Prefect hems on skirts, trousers, dresses, curtains etc.

Wundaweb is a fine, fusible fleece which bonds fabrics together quickly and easily, providing a natural, firmly jointed finish.

Produced by: Vilene

Part Number: 0905

 

2.05



Vilene Iron-on Volume Low Loft Fleece (per 1/4 metre)

Vilene Iron-on Volume Low Loft Fleece (per 1/4 metre)

Ref: 9844

In stock

Please note the minimum order quantity is a half metre. So you must enter at least 2 in the Quantity field.

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece.

Iron-on volume fleece quilts, clothing, bags, soft pelmets and tiebacks.
Low loft – for a higher loft use Medium Loft.

Width is 90cm

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.

Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gentle cycle or dry cleanable

Equivalent to Pellon #987F Fusible Fleece

Produced by: Vilene

Part Number: H630 Special

 

1.68



Vilene Iron-on Fleece Medium Loft (per 1/4 metre)

Vilene Iron-on Fleece Medium Loft (per 1/4 metre)

Ref: 9841

The price shown above is per quarter metre. Fabric can be purchased in quarter metre units. For example, if you wish to order 1 ½ metres enter “6” as the quantity (6 x 1/4m = 1 ½ metres). The fabric will be sent as a single piece

Iron-on volume fleece for quilts, clothing, bags, soft pelmets and tiebacks.
Medium loft – for a lower loft use Low Loft.

Width is 90cm

Place the wadding with the coated side on the wrong side of the fabric. Cover with a damp cloth and press each area for about 15 seconds, without pressing the iron too hard. Iron setting: Wool/Cotton. Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
Iron setting: Wool.

We strongly recommend that you attach a small piece to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.

Washable in temperatures up to 40 °C on a gently cycle or dry cleanable

Equivalent to Pellon Fusible Thermolam Plus #TP971F

Produced by: Vilene

Part Number: H640

 

2.24



505 Basting Spray

505 Basting Spray

Ref: 7238

In stock

Dear customer: Due to postal regulations concerning shipping pressurised containers we are sorry that we can no longer post this product. It is available in our shop and at shows.

Spray 505 from a distance of 25 to 30cm. Only spray a very thin layer of adhesive on to your fabric. Colourless, odourless and stainless.

Use for appliqué and quilting to position fabrics prior to sewing.

505 spray is repositonable. Quilt layers and applique lift easily leaving no residue behind. You can reposition several times for the first 15-20 minutes. After that you would have to reapply spray.

For basting quilt layers simply spray a very light coating on one side of the wadding. Position the quilt top onto wadding. You may want to do this in a few sections if you are working on a large project. It is very easy to reposition. Turn over and repeat the procedure for the backing. You can baste a quilt in about 10 minutes.

For raw edge applique: Spray a little on the back of the applique piece and position in place. Use a satin stitch or decorative stitch to cover the raw edge. For finished edge applique: Cut out paper pattern without seam allowance. Spray wrong side of pattern with 505 and stick to wrong side of fabric. Cut out applique from fabric with 1/4? seam allowance. Place applique with paper side up and spray 505 covering to edges. Fold and stick seam allowance onto paper. You can now stick applique on the background fabric and stitch. Cut out paper from back.


505 basitng spray was developed for use in the commercial embroidery industry and it does not gum up needles or scissors.

The bond will last about 2 months for polyester and about 4 months for natural/blends. Sew in place during that time. The bond will release when washed.

250ml.

Produced by: Odif

 

8.30



Recently Viewed